STEREO HYBRID 120 C:62

SLT 500 29

When we set out to design the ultimate full suspension e-MTB, we realised we needed a completely new approach. So we took all the knowledge we've accumulated from building some of the world's most acclaimed Bosch-powered bikes, added our engineers' unparalleled expertise in carbon frame technology, and came up with the bike you see here - the Stereo Hybrid C:62 120 SLT. E-MTBs don't come any lighter, faster or more accomplished than this.

Find your nearest CUBE dealer
Show all Specifications

STEREO HYBRID 120 C:62 SLT 500 29

Frame

Frame: Our carbon frame building technology makes use of Cube's proprietary Advanced Twin Mould process. It's a way of optimising the carbon layup and curing process, so that - like all our C:62 and C:68 frames - the Stereo Hybrid C:62 120 SLT has the perfect blend of stiffness, strength and low weight. Combined with our acclaimed Agile Ride Geometry (AGM) and features like Tuned Drive Position (TDP), we've given this high performance chassis absolutely the best characteristics to ensure that it handles intuitively and reliably, whatever the circumstances. And, as you'd expect, we've included a tapered steerer and Boost rear end to extract every ounce of performance out of both rider and drive unit. The ultimate e-MTB chassis? We certainly think so.


Image of 4
Bike classification category: 4
Components

Equipment: It's always fun kitting out our range-topping bikes - and this one was no exception. With a 'no compromise' approach, we began with Bosch's peerless CX drive unit and 500Wh battery, then mated them to SRAM's Eagle transmission. With up to 75Nm of available torque and a uniqely wide ratio cassette spanning 10 to 50 teeth, it's the ultimate e-bike setup for tackling any terrain. A Fox Float DPS Performance EVOL shock and RockShox's unique RS-1 fork keep the rubber side down, while grippy Schwalbe Racing Ralph and Rocket Ron tyres transfer the rider and motor's power to the trail via light, strong CSW MA 3.9 wheels. And last - but by no means least - we chose Magura MT8 hydraulic disc brakes for their reliable, powerful stopping performance - because power is nothing without control.

  • frame C:62 Monocoque Advanced Twin Mold Technology, ETC 4-Link, ATG, Boost148, Tuned Drive Position, AXH
  • color zeroblack
  • size 17", 19", 21"
  • fork Rock Shox RS-1, Carbon Upside-Down, Hydraulic X-Loc, Predictive Steering®, Tapered, 120mm
  • shock Fox Float DPS Performance, 184x44mm, Open/Medium/Firm Mode, EVOL Air Sleeve
  • shock hardware Top: 30x8mm, Bottom: 30x8mm
  • headset FSA Orbit I-t, Integrated, Top 1 1/8", Bottom 1 1/2"
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Rise Trail Bar Pro Carbon, 750mm
  • grips CUBE SCR
  • rear derailleur Sram XO1 Eagle, 12-Speed
  • shifters Sram XO1 Eagle Trigger
  • brake system Magura MT8, Hydr. Disc Brake (180/180)
  • crankset FSA CK-745, 16T
  • cassette Sram XG-1295, 10-50T
  • chain Sram PC-XO1 Eagle
  • wheelset DT CSW MA 3.9 Straightpull Wheelset, 28/32 Spokes, 15QR/X12, 622x20C Tubeless Ready, DT SWISS Pro Head® Reinforcement System, Squorx® Alloy Nipples, Boost, Predictive Steering®
  • front tire Schwalbe Rocket Ron, Kevlar, 2.25, LiteSkin
  • rear tire Schwalbe Racing Ralph, Kevlar, 2.25, LiteSkin
  • saddle Fi`zi:k Tundra M5
  • seat post CUBE Performance Motion Post Carbon, 31.6mm
  • seatclamp CUBE Varioclose, 34.9mm
  • engine Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
  • battery Bosch PowerPack 500
  • Bosch 4A
  • display Bosch Purion
  • weight 18.6 kg
Geometry

Geometries

Geometry STEREO HYBRID 120 C:62 SLT 500 29 Seat Tube Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height<br> to Hub Rear Travel Reach Stack
  • Info
  • 17"
  • 19"
  • 21"
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Price

For a definitive statement on the price of the bike with the desired equipment, drop in at one of the CUBE dealers: there you will receive comprehensive advice.

Dealer map

Dealer search

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

Highlight features

RockShox RS-1 carbon upside-down, hydraulic XLoc, Predictive Steering, tapered, 100 mm

This all-new Accelerator Damper combines incredible small bump performance with an ultra-efficient lock-out. An inverted fork that is light enough for XC races and stiff enough for trail riding.

Sram XO1 Egael, 10-50T cassette

A single glance at the new X-DOME™ Eagle™ cassette is all it takes to see that front derailleurs on mountain bikes are finally a thing of the past. Twelve cogs with 10 to 50 teeth and an overall gear ratio of 500 percent!”

Magura MT8, Carbon brakes

Despite being shamelessly lightweight, the MT8 offers the most braking power and durability in the entire Magura 2-piston family. The visible carbon construction of the brake lever and the forged, one-piece calliper with its elegant, mystic grey coating provide for the high-end look. Lightweight with no compromises.

CUBE MA wheelset

Maximum stiffness and legendary reliability while maintaining minimal weight – all thanks to Swiss precision wheel technology from DT Swiss. The CUBE MA wheelset delivers great traction and comfort with 22.5-mm-wide rims. The sophisticated hub body, cleverly placed spokes and the proven freewheel technology all combine to make a stunning wheel.

Trail Motion Rocker
Trail Motion Rocker
C:62 Carbon Technology
C:62 Carbon Technology

 

Comfort

Tour

Trail

All Mountain

Enduro

 

More models of this series

Advanced Twin Mold

The Advanced Twin Mold process eliminates any dangerous folding by continuous control of carbon fibers during the curing process. This is made possible by an internal form which provides the perfect frame form during the layup process. Each individual fibre remains precisely in position as it cures. In this way less material can be used as the individual layers can be more accurately and reliably positioned. This production method also makes it possible to increase the carbon fibre proportion in line with anticipated loadings at specific points on the frame. All C:62 and C:68 models are manufactured using this high-tech method.

Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Onepiece Design
      • Image of CUBE technology Onepiece Design
      • Onepiece Design

        Welded joints in our high-quality aluminum frames are specially finished via this method and create the impresssion of seamless tube design. This generates the visual effect of moulding and ensures high load bearing capacity.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology Tuned Drive Position
      • Image of CUBE technology Tuned Drive Position
      • Tuned Drive Position

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Boost148
      • Image of CUBE technology Boost148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology FOX Customized Setup
      • Image of CUBE technology FOX Customized Setup
      • FOX Customized Setup

        Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology Efficient Trail Control
      • Image of CUBE technology Efficient Trail Control
      • Efficient Trail Control

        Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

Suitable accessories

cube stories

The Mountainhunter

Read more