2019

AXIAL WS C:62

SL Disc

The Axial C:62 SL's combination of the best frame materials and the finest components makes it the perfect choice for the racer in you, whether you're battling for position in the peloton or duking it out with your training buddies. You don't need to compromise, because we didn't either. The frame features our premium C:62 carbon for the ultimate in low weight and exceptional stiffness, and it's matched by a full C:62 carbon fork up front. Shimano's 2x11 Ultegra transmission serves up flawless gear shifts every time, while matching hydraulic disc brakes offer perfect modulation and control in any weather conditions. Throw in the light, stiff and strong Newmen wheelset and grippy, fast-rolling Continental tyres, and you've got all the ingredients for a supremely quick, agile and light race machine.

Find your nearest CUBE dealer

Components

  • frame C:62 Advanced Twin Mold Technology Aero Frame, Flat Mount Disc, Road Aero Endurance Geometry, AXH, 12x142mm
  • size 47 cm, 50 cm, 53 cm, 56 cm
  • fork CUBE CSL Evo Aero C:62 Technology, 1 1/8" / 1 1/4" Tapered, Flat Mount, 12x100mm
  • stem Newmen Evolution 318.4, 31.8mm
  • handlebar Newmen Advanced Wing Bar, Carbon
  • rear derailleur Shimano Ultegra RD-R8000-DGS, 11-Speed
  • front derailleur Shimano Ultegra FD-R8000-F
  • brake system Shimano Ultegra BR-R8070, Hydr. Disc Brake, Flat Mount (160/160)
  • crankset Shimano Ultegra FC-R8000, Hollowtech II, 50x34T, 170mm
  • chain Shimano CN-HG700-11
  • colour team ws
  • handlebar tape CUBE Grip Control
  • shift/ brake levers Shimano Ultegra ST-R8020
  • cassette Shimano Ultegra CS-R8000, 11-32T
  • wheelset Newmen Evolution SL R.32
  • tyres Conti Grand Prix 5000 Kevlar, 25-622
  • saddle Selle Royal Asphalt
  • seat post Newmen Advanced, Carbon, 27.2mm
  • weight 7,9 kg

Geometries

Geometry Seat Tube Seat Tube Center-Center Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height to Hub Reach Stack Wheelsize
  • Info
  • 47cm
  • 50cm
  • 53cm
  • 56cm

Details

This is pure, high-end carbon frame construction. Our Advanced Twin Mould monocoque technology gives us full control over fibre lay-up during construction, so we can fine-tune every area of the frame to optimise both weight and stiffness. The icing on the cake is our premium C:62 carbon, which has the strength to enable us to build such a lightweight yet exceptionally fast chassis. Oversized main tubes and chainstays - combined with a tapered head tube, extremely stiff bottom bracket and 12mm thru axles front and rear - are instrumental in achieving a stiffness-to-weight ratio that's the envy of our competitors. Controlled flex in the seat stays, a flattened top tube and the carbon fork blades all add comfort without compromising efficiency, so you'll be able to ride at your full potential on even the longest of races or training days. And, of course, internal cable routing minimises maintenance, maximises gear change precision... and complements the frame's stunning looks.

Image of 1
Bike classification category: 1
More about classification

More models of this series

 

Leisure

Tour

Sport

Trail

 

Technology

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Advanced Twin Mold
      • Image of CUBE technology Advanced Twin Mold
      • Advanced Twin Mold

        This technique uses a complete core to provide the perfect frame form during the lay-up process. As with the Twin Mold technology, precise inserts are used to ensure extra strength at high-stress frame points. This combination offers maximum control over fibre orientations during the lay-up and production process. The Advanced Twin Mold high-tech carbon manufacturing process translates to outstanding product safety and quality together with optimum weight and stiffness characteristics.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology Aerodynamic System
      • Image of CUBE technology Aerodynamic System
      • Aerodynamic System

        Perfect aerodynamics and geometry adjustment characterize this package to the smallest detail the light and stiff Advanced Twin Mold carbon frame with horizontal dropouts is designed for the use of electronic circuit components to minimize air resistance. Battery and cable are hiding elegantly in the framework and also the brakes fit perfectly together with the Aerium Super HPC carbon fork.

Purchase Informations

Add to watchlist

AXIAL WS C:62 SL Disc

For a definitive statement on the price of the bike with the desired equipment, drop in at one of the CUBE dealers: there you will receive comprehensive advice.

Dealer search

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

Suitable accessories

CUBE Stories

#becube