2019

TWO15

Race

Downhill racing continues to evolve, and so does our Two15 Race downhiller. Light, dynamic, affordable and a potent force on the downhill race circuit and in the bike park, our gravity bike's design builds on the success of its predecessors. With a full 215mm of travel at the rear, the Two15 Race has plenty in reserve for tackling even the most demanding of downhill trails. The Suntour RUX RC2 fork and Fox Van rear shock work together to provide the grip and control you'll need to tame any terrain at speed, while Sram's 10 speed GX components will help ensure you're always in the right gear to get the power down. Magura MT5 brakes with a 200mm front rotor have all the stopping power you'll need, served up via a lightweight and tough Answer Atac Duroc wheelset shod with grippy Schwalbe Magic Mary tyres. Full bore, full control and fully affordable: that's the Two15 Race.

Find your nearest CUBE dealer
  • application: Gravity
  • frame material: Aluminium
  • size: S / 27.5, M / 27.5
  • Art. No: 258100

Components

  • frame HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ISCG Mount, 215mm Travel
  • size S / 27.5, M / 27.5
  • fork SR Suntour RUX RC2 PCS, Compression & Rebound Adjust, 200mm
  • headset Cane Creek 40.ZS49 / 40.EC4930
  • stem Race Face Chester 35 Direct Mount
  • handlebar Race Face Chester 35, 780mm
  • grips CUBE Race SL Grip 29.5, 1-Clamp
  • rear derailleur Sram GX short cage, Type 2.1, 10-Speed
  • shifters Sram GX Trigger
  • brake system Magura MT5, Hydr. Disc Brake (203/180)
  • crankset Race Face Chester 36T, 165mm
  • chain KMC X10-73
  • colour grey´n´black
  • shock Fox Van RC, 240x76mm, Rebound & Low Speed Compression Adjust
  • cassette Sram PG-1030, 11-28T
  • wheelset Answer Atac Duroc 30, 20x110mm / 12x157mm, Tubeless Ready
  • tyres Schwalbe Magic Mary, 2.35
  • saddle Natural Fit Active Race
  • seat post CUBE Performance Post, 31.6*350mm
  • seatclamp CUBE Screwlock, 34.9mm
  • extras Syntace 157mm X12 Axle
  • shock hardware Top: 30x8mm, Bottom: 22x8mm
  • chain guide MRP G3 Chain Guide, 34-38T, ISCG05
  • weight 17,1 kg

Geometries

Geometry Seat Tube Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height to Hub Rear Travel Reach Stack Wheelsize
  • Info
  • S
  • M

Details

The Two15 Race is designed to be fast-rolling, nimble and controllable. With practically bottomless travel and the sharp handling and superb responsiveness you'd expect from a CUBE full suspension bike, it's all you need to chase down a podium place or hone your bike park technique. We've even kept the looks clean and elegant, with internal cable routing that'll help ensure perfect shifting in even the filthiest of riding conditions. Optimised chainstays equipped with a 12x157mm thru axle to provide accurate tracking and razor-sharp handling - and angles specially designed to keep you in control no matter how rowdy things get - are all part of the package.

Image of 6
Bike classification category: 6
More about classification

More models of this series

 

Cross Country

Tour/Trail

All Mountain

Enduro

Gravity

 

Technology

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Aluminium Superlite
      • Image of CUBE technology Aluminium Superlite
      • Aluminium Superlite

        Extremely high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are double butted, giving very light tubesets with a high level of stiffness.

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology FOX Customized Setup
      • Image of CUBE technology FOX Customized Setup
      • FOX Customized Setup

        Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Purchase Informations

Add to watchlist

TWO15 Race

For a definitive statement on the price of the bike with the desired equipment, drop in at one of the CUBE dealers: there you will receive comprehensive advice.

Dealer search

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

Suitable accessories

CUBE Stories

#becube