An e-bike equipped to tackle any task you throw at it, from the weekday commute to a weekend exploration of forest trails... surely that's too much to ask? Not as far as we're concerned. The Acid Hybrid ONE Allroad is a Swiss army knife of e-bikes, combining all the go-anywhere potential of our affordable hybrid hardtail with the do-anything capability offered by a full complement of accessories. You could think of it as a crossover e-mtb. From the third generation Bosch drive unit and 9 speed Shimano transmission to the powerful hydraulic disc brakes and comfortable suspension fork, it's all designed to make your riding fun, safe and rewarding. And with mudguards, lights and kickstand, you're fully equipped for any eventuality.
Seat Tube Seat Tube Center-Center Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height to Hub Reach Stack 
With years of experience building high tech aluminium frames and working with the Bosch drive units, our engineering team was able to design a sleek new frame for the Acid Hybrid ONE. The stiff, strong hydroformed down tube and bottom bracket enclose the battery and drive unit in an elegantly efficient structure. You can even charge the battery without removing it from the frame, if you wish. The clean appearance is enhanced by details like fully integrated rack and mudguard mounting points, as well as internally routed cables for longer-lasting gear shifting. We even remembered to make it easy to upgrade to a dropper seatpost, just in case your off-road adventures require a future upgrade.
The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All
For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.
Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.
The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.
The “engine” is the critical part of an Ebike because of its weight and its junction to the regular drivetrain. These factors present a real challenge for the frame design. This is why CUBE developed an innovative new frame construction for the new Ebike generation: simultaneously being the cradle for the electric motor, the pivot for the rear link and the seat of the shock eyelet, the very complex area of the bottom bracket is made of two forged halves. The groove in the front section together with the specially formed down tube is home for the power pack which in this way has a very low position in the frame triangle. The positive outcome is an extremely low center of gravity supporting an agile riding characteristic while achieving a super rigid bottom bracket area.
To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.
This elaborate procedure with doubled weld seams has two advantages: On the one hand, it improves the firmness of the
weld seams and minimizes the load peaks on the tube welds through energy flow and on the other hand, it helps the frame
to a better and more organic look due to the smooth and hardly noticeable welds.
CUBE Bikes with this labelling fulfill all legal requirements and meet all safety demands according to the StVZO German Road Traffic Licensing Regulations. Lighting systems and reflectors mounted are tested and certified accordingly. These bikes take into account every security-related detail to guarantee safe and relaxed mobility in traffic.
Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.
