STING WLS HYBRID 120

SL 500 27.5

Model Sting WLS Hybrid 120 bez námahy spája perfektný trailový bicykel a výkonný E-MTB. Poskladali sme tento bicykel tak, aby bol perfektne spoľahlivým spoločníkom. Nový rám obsahuje množstvo inovatívnych prvkov a vysokokvalitné komponenty, ktoré sú taktiež odolné. Model Sting WLS Hybrid 120 je pripravený na všetko, čo sa mu dostane do cesty počas vášho hľadania dobrodružstiev na trailoch.

nájdite predajcu CUBE vo vašej blízkosti:
Zobraziť kompletnú špecifikáciu

STING WLS HYBRID 120 SL 500 27.5

Frame

Sting Hybrid prináša výrazný dynamický dizajn modelov Stereo Hybrid do série WLS. Vďaka technológii Tuned Drive Position (TDP) sme mohli skrátiť zadnú stavbu. To v spojení s chválenou Efficient Trail Control (ETC) kinematikou, semi-integrovaným akumulátorom a Agile Trail geometriou (ATG) vytvára neuveriteľne kompaktný rám s fantastickou ovládateľnosťou. A keďže budete odteraz vďaka tomu rýchlo rezať zákruty, zvolili sme tiež širšie náboje (štandard 148 mm Boost), ktoré pridávajú kolesám tuhosť a aj vyššiu spoľahlivosť. Káble radenia sú vedené vnútrom rámu, vďaka čomu sú chránené a schované tak, že rám má zvýraznené svoje čisté línie.


Image of 4
Bike classification category: 4
Components

V súčasnosti najlepšia dostupná pohonná jednotka od spoločnosti Bosch je bezpochyby výnimočnou súčasťou modelu Sting WLS Hybrid SL - motor CX ponúka krútiaci moment až 75 Nm. Akumulátor s vysokou kapacitou 500Wh sme dali do štandardnej výbavy, vďaka čomu vám bude sila motora pomáhať veľmi dlhú dobu zdolávať trailové dobrodružstva. Nová 11-rýchlostná sada Shimano XT s kazetou so širokým rozsahom 11-46 zubov nielenže garantuje najlepší výkon radenia, tiež ale zaručí správny prevodový pomer v každom teréne. Hydraulické kotúčové brzdy Deore vás zastavia spoľahlivo v každom počasí. Odpružená vidlica RockShox Recon Silver RL a tlmič Fox Float DPS spolupracujú na tom, aby bol bicykel pohodlný a pod kontrolou aj na tých najnáročnejších trailoch. Tento výkonnostný ženský elektrobicykel dokončujú tuhé a odolné kolesá s ráfikmi CUBE EX23 s nábojom používajúcim štandard 148 mm Boost a všestranné plášte Schwalbe Nobby Nic.

  • frame HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ATG, Boost148mm, Tuned Drive Position, AXH
  • color mint´n´flashgreen
  • size 16", 18"
  • fork Rock Shox Recon Silver TK Air, 120mm, PopLoc
  • shock Fox Float DPS Performance, 184x44mm, Open/Medium/Firm Mode, EVOL Air Sleeve
  • shock hardware Top: 30x8mm, Bottom: 30x8mm
  • headset FSA Orbit Z-t, Top Zero-Stack 1 1/8" (OD44mm), Bottom Integrated 1 1/2"
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Rise Trail Bar Pro, 740mm
  • grips CUBE Natural Fit Tour
  • rear derailleur Shimano XT RD-M8000-DGS, ShadowPlus, 11-Speed, Direct Mount
  • shifters Shimano XT SL-M8000-B-I, Direct Attach
  • brake system Shimano Deore BR-M615, Hydr. Disc Brake (180/180)
  • crankset FSA CK-745, 16T
  • cassette Shimano XT CS-M8000, 11-46T
  • chain KMC X11
  • rims CUBE EX23, 32H, Disc, Tubeless Ready
  • front hub Shimano Deore HB-M618, QR15
  • rear hub Shimano Deore FH-M618-B, X12, Boost
  • tires Schwalbe Nobby Nic Kevlar 2.35
  • saddle Selle Italia WLS Performance
  • seat post CUBE Performance Post, 31.6mm
  • seatclamp CUBE Screwlock, 34.9mm
  • engine Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
  • battery Bosch PowerPack 500
  • Bosch 4A
  • display Bosch Purion
  • weight 21.8 kg
Geometry

Geometries

Geometry STING WLS HYBRID 120 SL 500 27.5 Seat Tube Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height<br> to Hub Rear Travel Reach Stack
  • Info
  • 16"
  • 18"
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Price

For a definitive statement on the price of the bike with the desired equipment, drop in at one of the CUBE dealers: there you will receive comprehensive advice.

Dealer map

CUBE Maps

 

Comfort

Tour

Trail

All Mountain

Enduro

 

Viac modelov tejto série

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        Optimalizovali sme nᚠnávrh koncoviek založený na systéme pevnej osi Syntace X12. Teraz je možné nainštalovat dlhšie Direct Mount pätky pre prehadzovace. Preto sa zvýšila presnost radenia prevodov a zväcšila tuhost, taktiež nemuseli byt zrezané žiadne vlákna.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        Aby sme ochránili naše high-endové hliníkové rámy pred poškodením, sú vyrobené s naším CUBE Frame Safe systémom vymenitelnej pätky prehadzovaca. Závit uchytenia je na pätke a nie na ráme, ako je bežné. V prípade nehody môže byt táto pätka jednoducho a rýchlo vymenená za novú.

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        Naše HPA modely sú vyrobené pomocou Advanced Hydroforming technológie. Bežné procesy hydroformovania nedokážu dosiahnut takéto špeciálne tvary a technické výhody. Vzhladom k tomu, že táto výrobná metóda redukuje pocet zvarov, sa znižuje hmotnost, zatial co je výdrž zvyšovaná.

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        Prispôsobili sme ARG koncept tak, aby boli garantované benefity našej Agile Ride geometrie taktiež aj na agresívnych trailových jazdách. Toto prispôsobenie zahrna kompaktné prevedenie rámu a zníženú výšku hornej rámovej trubky. Vdaka tomu je tažisko umiestnené nižšie a máte viac priestoru pre manévrovanie nad rámom. A takto vzniká Agile Trail geometria – viac slobody, viac kontroly, viac zábavy!

  • Icon of CUBE technology Efficient Trail Control
      • Image of CUBE technology Efficient Trail Control
      • Efficient Trail Control

        Systém Efficient Trail Control prináša perfektnú kinematiku pruženia v každom teréne, ktorý si dokážete predstavit, a pokrýva najširší rozsah jazdných štýlov. Garantuje velmi citlivý bicykel, zabranuje pohupovaniu a ponúka vždy plne využitelný zdvih.

  • Icon of CUBE technology FOX Customized Setup
      • Image of CUBE technology FOX Customized Setup
      • FOX Customized Setup

        Sofistikovaná kinematika pruženia môže fungovat bezchybne len v prípade, že je zvolený tlmic správne upravený. V spolupráci s firmou Fox Racing Shox sme po výskume našli pomocou rozsiahleho testovania toto špecifické nastavenie. Do tohto testovania bol zaradený takmer každý celoodpružený bicykel CUBE.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Možnost skrytého vnútorného vedenia ovládania umožnuje integrovat teleskopickú sedlovku s týmto systémom. Toto riešenie je najmodernejšie.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        Tento návrh hlavovej trubky je tuhší v porovnaní so starším rovným a poskytuje bezpecnejší pocit z jazdy aj v nárocnom teréne. Minimálna pružnost v prednej casti rámu znamená najlepšiu možnú presnost riadenia. Aj vidlice sa stávajú tuhšími vdaka kónickému stlpiku.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        Lahké Trail Motion vahadlo obsahuje perfektný pomer prepákovania vo všetkých jazdných situáciách. Pruženie vždy reaguje super rýchlo a pohltí aj velké nerovnosti.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        Na leštených, brúsených a všetkých HPC rámoch sú logá a grafika aplikované v podobe viacvrstvového laku. Túto technológiu úpravy povrchu používame hlavne z dôvodu šetrenia hmotnosti.

  • Icon of CUBE technology Tuned Drive Position
      • Image of CUBE technology Tuned Drive Position
      • Tuned Drive Position

        Na rozdiel od bežnej pozície pohonnej jednotky Bosch v ráme sme otocili motor o 6°, co umožnuje nižšie umiestnený bod spojenia retazových vzpier zadnej stavby s rámom a prináša radikálne zníženie narážania retaze do nich. Športový a obratný vzhlad je pozitívny vedlajší efekt.

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        Pre naše high-endové bicykle používame hliníkovú zliatinu 7005 High Performance. Pomocou trojitého alebo aj štvoritého zoslabovania trubiek získavame rôzne hrúbky stien. Hliníkové trubky sú spevnené tam, kde je to potrebné, a odlahcené tam, kde je to možné. Navyše ešte používame špeciálne tvary trubiek vytvorené pomocou technológie hydroformingu, aby lepšie zvládali sily z rôznych smerov a vytvárali maximálnu tuhost.

  • Icon of CUBE technology Boost148
      • Image of CUBE technology Boost148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Vnútorne vedené káble ponúkajú mnohé výhody. Káble sú chránené pred necistotami, co predlžuje ich životnost, hmotnost je znížená vdaka absencii externých úchytov a bicykel má cistý a elegantný vzhlad.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Smooth Welded
      • Image of CUBE technology Smooth Welded
      • Smooth Welded

        Tento prepracovaný postup s dvojito zváranými spojmi má dve výhody: v prvom rade vylepšuje pevnost zvarov a minimalizuje špickové zataženie zvarov trubiek, a v druhom rade pomáha rámu získat krajší a viac zosúladený vzhlad.

Vhodné príslušenstvo

cube stories

The Mountainhunter

Čítať ďalej

#becube instagram