2018

ACID HYBRID

ONE Allroad 500 29

Framevarianten
Batterijvarianten

Huh? Wat is dit nou? Mountainbike? Toerfiets? Urban bike? Antwoord: de Acid Hybrid One Allroad is het allemaal! Keihard knallen door de stad of lekker crossen door het bos; dankzij de lichtrollende terreinbanden, comfortabele verende voorvork en krachtige, betrouwbare schijfremmen kan het allebei. En als je gewoon relaxed wilt toeren kan dat ook, want dankzij z’n uitgebalanceerde geometrie is het lekker zitten op deze e-bike. Rechtop genoeg om lekker om je heen te kijken, maar weer niet zo recht dat je er geen sportief gevoel bij krijgt. Maar wat je er ook mee gaat doen, in alle gevallen is de Bosch Active Plus aandrijflijn stil, soepel en krachtig. En ook de Shimano transmissie met z’n negen versnellingen zal je nooit teleurstellen. Hij zou eigenlijk knal rood moeten zijn, met een groot wit kruis er op. Acid Hybrid One Allroad is immers het Zwitserse zakmes onder de e-bikes.

  • application: Tour Commuting
  • size: Men: 15", 17", 19", 21", 23", Trapeze: 15", 17", 19"
  • Artikelnummer: 133151

Componenten

  • frame Aluminium Superlite, Advanced Hydroforming, ARG, Double Butted, Disc Only, Tapered Headtube, Internal Cable Routing
  • size Men: 15", 17", 19", 21", 23", Trapeze: 15", 17", 19"
  • fork SR Suntour XCM ATB Coil, 100mm, Lockout
  • headset FSA Orbit 1.5B ZS-R, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm)
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Rise Trail Bar, 680mm
  • grips CUBE Performance Grip
  • rear derailleur Shimano RD-M2000-SGS, 9-Speed
  • shifters Shimano SL-M2000, Rapidfire-Plus
  • brake system Shimano BR-M315, Hydr. Disc Brake (180/180)
  • crankset FSA CK-602, 38T
  • chain KMC X9
  • colour black´n´white
  • cassette Shimano CS-HG200, 11-34T
  • front hub Shimano HB-TX505, QR, Centerlock
  • rear hub Shimano FH-TX505, QR, Centerlock
  • rims CUBE ZX20, 32H, Disc
  • rear tire Schwalbe Rapid Rob, Active, 2.25
  • pedals CUBE PP Trekking
  • saddle Selle Royal MTB
  • seat post CUBE Performance Post, 30.9mm
  • seatclamp CUBE Varioclose, 34.9mm
  • front light Trelock LS230, 12V, DC
  • rear light Herrmans H-Trace Mini, DC
  • kickstand CUBEstand Cmpt
  • mudguards SKS MTB Allroad Black Matt
  • bell Humpert
  • battery Bosch PowerPack 500
  • drive unit Bosch Drive Unit Active Plus (50Nm) Cruise (250Watt)
  • display Bosch Purion
  • front tire Schwalbe Tough Tom, Active, 2.25
  • charger Bosch 2A
  • weight 22,6 kg

Geometrieën

Geometry Zitbuis Zitbuis centraal- centraal Bovenbuis horizontaal Zitbuishoek Balhoofdhoek Liggende achterbrug Balhoofdbuis Wielbasis Bottom bracket- Hoogte tot Naaf Reach Stack
  • Info
  • 15''
  • 17''
  • 19''
  • 21''
  • 23''

Details

Een veelzijdige e-bike als de nieuwe Acid Hybrid One heeft een passend frame nodig. Dat hebben we daarom gemaakt van ons hoogwaardige Superlite aluminium, voor een optimale mix van gewicht, stijfheid en comfort. De lasverbindingen lopen vloeiend in elkaar over en ook de gestroomlijnde accuafdekking draagt bij het strakke uiterlijk. De balhoofdbuis is conisch, voor scherp en precies sturen. Ook de 3D gesmede achterpatten dragen bij aan de hoge mate van stabiliteit. Bovendien bieden ze plaats aan spatborden en een achterstandaard. Er is zelfs, mocht je dat willen, de optie om een bagagedrager te monteren. Om het af te maken zijn alle kabels binnendoor gevoerd. Mooier, maar het schakelt ook soepeler en beperkt het onderhoud. En tot slot misschien wel het allerbelangrijkste: onze vermaarde Agile Ride Geometry (AGR), die een speels karakter combineert met een hoge mate van stabiliteit en controle. Want wat heb je aan de mooiste fiets als ’ie niet lekker rijdt?

Image of 2
Fiets-classificatie: 2

Overige modellen binnen deze lijn

 

Commuting

Tour

Sport

Alpcross

 

Technologie

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Easy Mount Kickstand
      • Image of CUBE technology Easy Mount Kickstand
      • Easy Mount Kickstand

        The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.

  • Icon of CUBE technology Optimal Drive Position
      • Image of CUBE technology Optimal Drive Position
      • Optimal Drive Position

        The “engine” is the critical part of an Ebike because of its weight and its junction to the regular drivetrain. These factors present a real challenge for the frame design. This is why CUBE developed an innovative new frame construction for the new Ebike generation: simultaneously being the cradle for the electric motor, the pivot for the rear link and the seat of the shock eyelet, the very complex area of the bottom bracket is made of two forged halves. The groove in the front section together with the specially formed down tube is home for the power pack which in this way has a very low position in the frame triangle. The positive outcome is an extremely low center of gravity supporting an agile riding characteristic while achieving a super rigid bottom bracket area.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Smooth Welded
      • Image of CUBE technology Smooth Welded
      • Smooth Welded

        This elaborate procedure with doubled weld seams has two advantages: On the one hand, it improves the firmness of the
        weld seams and minimizes the load peaks on the tube welds through energy flow and on the other hand, it helps the frame
        to a better and more organic look due to the smooth and hardly noticeable welds.

  • Icon of CUBE technology StVZO
      • Image of CUBE technology StVZO
      • StVZO

        CUBE Bikes with this labelling fulfill all legal requirements and meet all safety demands according to the StVZO German Road Traffic Licensing Regulations. Lighting systems and reflectors mounted are tested and certified accordingly. These bikes take into account every security-related detail to guarantee safe and relaxed mobility in traffic.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.