2018

TWO15

SL 27.5

Of je nu een race tegen de klok rijdt tijdens een downhill-wedstrijd of gewoon lekker aan het klooien bent in het bikepark, de Two15 SL is de bike die je moet hebben. Zo sterk als de gepantserde geldwagens van de Nederlandse Bank, maar veel lichter dan de boodschappenfiets van je vriendin/vrouw/vriend/echtgenoot (doorstrepen wat niet van toepassing is). Licht is fijn, want dat betekent dat je bike veel beter hanteerbaar is. En dat resulteert weer in meer snelheid. En dat is waarnaar je op zoek bent, toch? Om je daarbij te helpen hebben onze ontwerpers bij het zoeken naar onderdelen geen compromissen gesloten. Lees maar mee: Fox 40 Float Factory voorvork, Fox Float X2 Factory demper, SRAM X01 DH 7-speed aandrijflijn, Magura MT7 remmen met dubbele zuigers en lichte maar taaie CSW DH 3.7 wielen van DT Swiss met - hoe kan het ook anders - een setje Magic Mary’s van Schwalbe. Nog iets te wensen? Nee? Okay dan, knallen maar!

  • application: Gravity
  • frame material: Aluminium
  • size: S, M, L
  • artikelnummer: 158200

componenten

  • frame HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ISCG Mount, 215mm Travel
  • size S, M, L
  • fork Fox 40 Float Factory RC2 FIT, 20x110mm, 203mm, Kashima Coated
  • headset Cane Creek 40.ZS49 / 40.EC49\30
  • stem Race Face Atlas 35 Direct Mount
  • handlebar Race Face SixC 35, 820mm
  • grips SDG Slater
  • rear derailleur Sram XO1 DH medium cage, 7-Speed
  • shifters Sram XO1 DH Trigger
  • brake system Magura MT7, Hydr. Disc Brake (203/180)
  • crankset Race Face SixC 32T, 165mm
  • chain Sram PC-1110
  • colour blue´n´orange
  • shock Fox Float X2 Factory, 240x76mm, High/Low Speed Rebound & Compression, Kashima Coated
  • cassette Sram XG-795 DH, 10-24T
  • wheelset DT CSW DH 3.7 Straightpull Wheelset, 32/32 Spokes, 20mm / 157x12mm, Tubeless Ready
  • rear tire Schwalbe Magic Mary, Addix Soft, Kevlar, Super Gravity, Tubeless Easy, 2.35
  • saddle SDG FLY 2.0 I-Beam
  • seat post SDG I-Beam Carbon, 31.6mm
  • seatclamp CUBE Screwlock, 34.9mm
  • extras Syntace 157mm X12 Axle
  • front tire Schwalbe Magic Mary, Addix Ultrasoft, Kevlar, Super Gravity, Tubeless Easy, 2.35
  • shock hardware Top: 30x8mm, Bottom: 22x8mm
  • chain guide MRP G3 Alloy Chain Guide, 32-36T, ISCG05
  • weight 15,5 kg

geometrieën

Geometry Zitbuis Bovenbuis horizontaal Zitbuishoek Balhoofdhoek liggende achterbrug balhoofdbuis wielbasis bottom bracket- hoogte <br> tot naaf Veerweg achterbrug Reach Stack
  • Info
  • S
  • M
  • L
  • XL

Details

Zwaartekracht is je vriend en vijand tegelijkertijd. Deze natuurkracht stelt je in staat om te vliegen, maar brengt je soms ook ongewild en onaangenaam hard in contact met Moeder Aarde. Als het spel met de zwaartekracht je ding is, moet je de Two15 27.5 hebben. Snel en lichtvoetig, maar ook stabiel en controleerbaar. Z’n frame is ontwikkeld op basis van ons befaamde High Performance Aluminium (HPA), met grondig bewerkte framebuizen. Die wegen niks teveel, maar zijn wel bestand tegen de meest extreme belasting. Dat zeggen niet wij, maar de resultaten uit ons testlab. Dat lab is de nachtmerrie van ieder frame, maar de Two15 doorstond alle martelingen probleemloos. Sterk en mooi gaan hier samen; alle kabels lopen binnendoor voor een cleane look, makkelijk schoonmaken en soepel schakelen. De lengte van de achterbrug is gefinetuned voor gebruik in combinatie met voorvorken met een veerweg van 200 mm of meer. En dankzij de 157 mm brede steekas, de vlakke hoeken en de stijve voortrein blijft de Two15 met een autistische hardnekkigheid de door jou gekozen lijn volgen..

Image of 6
Fiets-classificatie: 6

Specificatie highlights

Sram XG-795 DH Gear

Less is more! The Sram XG-795 DH with 10-24T offers you clean gear changes for downhill riding.

Fox 40 Float Factory RC2 FIT Suspension Fork

For heavy off-road assignments you need materials that were developed specifically for the cause. The Fox 40 Float Factory RC2 FIT suspension fork is always up to the task. It can be adjusted perfectly to suit the rider and the double bridge offers precision and reliability on the trails.

overige modellen binnen deze lijn

 

Cross Country

Tour/Trail

All Mountain

Enduro

Gravity

 

technologie

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology Aluminium Ultralite
      • Image of CUBE technology Aluminium Ultralite
      • Aluminium Ultralite

        Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are triple butted, giving very light tubesets with a high level of stiffness.

  • Icon of CUBE technology FOX Customized Setup
      • Image of CUBE technology FOX Customized Setup
      • FOX Customized Setup

        Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.