2019

REACTION HYBRID

HD 500 29

A Reaction Hybrid HD valóban kiérdemelte a "Heavy Duty" jelzőt. A gondosan kiválogatott, strapabíró és erős alkatrészek tökéletesen passzolnak a merev, gravity cast vázunkhoz, hogy olyan e-bike-ot hozzanak létre, ami még 160kg-os tömeggel is használható. Az erőteljes Bosch CX motor nem csak gyönyörűen integrálva van a vázba, de a maxinális erőátvitelhez is tökéletesen pozícionált. A tapered fejcső, 12mm-es Boost átütőtengely és a nagyra becsült Agile Ride Geometry olyan irányíthatóságot biztosít, ami mindig intuitív és biztonságos. Nem számít milyen meredek a mászás, a 11 sebességes Shimano XT váltás 11-46 fogas kazettával könnyedén fel fog juttatni a tetejére. A Magura MT5 hidraulikus tárcsafékek az agresszív mintájú, 2,6-os Nobby Nic külsőkkel kiemelkedő kontrollt adnak a sebességed felett minden időjárásban. Végül az extrém stabil Newmen Evolution SL E.35 kerékszettel, kiegészítőkkel és vázon belül vezetett bowdenekkel egészítettük ki ezt a különösen strapabíró szettet.

Az Önhöz legközelebbi CUBE kereskedő megkeresése:

Alkatrészek

  • frame Aluminium Superlite, Gravity Casting, Agile Ride Geometry, Tapered Headtube, Internal Cable Routing, Semi-Integrated Battery, Boost 148
  • size 17", 19", 21", 23"
  • villa Fox 34 Rhythm, 2-Position Sweep-Adjust GRIP Damper, Tapered, 15x110mm, E-Bike Optimized, 100mm
  • kormánycsapágy FSA Orbit 1.5E ZS, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm
  • stucni Newmen Evolution 318.4, 31.8mm
  • kormány Newmen Evolution 318.20, 760mm
  • markolat CUBE Race Grip 31mm, 1-Clamp
  • hátsó váltó Shimano XT RD-M8000-DGS, ShadowPlus, 11-Speed
  • váltókarok Shimano XT SL-M8000, 11-Speed
  • fékek Magura MT5, Hydr. Disc Brake (203/180)
  • hajtómű Race Face Aeffect, 175mm, 15T
  • lánc KMC X11e
  • szín iridium´n´black
  • fogaskoszorú Shimano SLX CS-M7000, 11-46T
  • kerékszett Newmen Evolution SL E.35, 28/28 Spokes, 15x110mm / 12x148mm, Tubeless Ready
  • külsők Schwalbe Nobby Nic Kevlar 2.60, Addix Speedgrip, Tubeless Easy
  • pedál CUBE PP MTB
  • nyereg Natural Fit Active Race
  • nyeregcső Newmen Evolution, 30.9mm
  • nyeregcső bilincs CUBE Varioclose, 34.9mm
  • battery Bosch PowerPack 500
  • drive unit Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
  • display Bosch Purion
  • charger Bosch 4A
  • weight 21,6 kg

Geometriák

Geometry nyeregvázcső-hossz nyeregvázcső-hossz center-center vízszintes felsőcsőhossz nyeregvázcső-szög fejcsőszög láncvillahossz fejcsőhossz tengelytáv csapágyesés reach stack Kerékméret
  • Info
  • 16''
  • 17''
  • 18''
  • 19''
  • 21''
  • 23''

Részletek

Az erő kontroll nélkül haszontalan. Emiatt terveztük a Reaction Hybrid HD vázát úgy, hogy tökéletes harmóniában működjön a Bosch CX motorjával. A gravity cast alsócső integrálja a motort és ideális egyensúlyt képez a stabilitás, merevség és tartósság között. A lényegében teljesen integrált akkumulátor követi a váz letisztult vonalait, amellett, hogy változatlanul tölthető anélkül is, hogy ki kellene venni. A vázon belül vezetett bowdenek alacsony karbantartási igényt biztosítanak, továbbá elő van készítve a váz dropper nyeregcső fogadására is. A 12mm-es Boost-os tengely a már sokat bizonyított Agile Ride Geometry-vel olyan könnyed és intuitív irányíthatóságot biztosít, hogy többre fogsz vágyni tőle.

Image of 3
Kerékpár felhasználási terület: 3
További információk a kategóriákról

A sorozat más modelljei

 

Commuting

Tour

Sport

Alpcross

 

Technológia

  • Icon of CUBE technology Agile Ride Geometry
      • Image of CUBE technology Agile Ride Geometry
      • Agile Ride Geometry

        We ran innumerable tests to develop the Agile Ride Geometry in our series of big wheel bikes. We also added the 27.5in wheel size to the very well received portfolio. Three important details lead to the very agile character. Increased fork offsets let us achieve the same trail as our 26in bikes without having to steepen the head angle, thus maintaining generous toe clearance to the front wheel. Secondly we shortened the chain stays without compromising the seat angle. We invented a patented construction to mount the front derailleur to give us more tyre clearance while keeping a conventional seat angle, leading to a perfect riding position for every rider size. Last but not least we kept the BB height the same as on our 26in bikes. These measures lead to a natural riding position. Every mountain biker will feel immediately at home on a CUBE 29er or 27.5.

  • Icon of CUBE technology Boost148
      • Image of CUBE technology Boost148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Easy Mount Kickstand
      • Image of CUBE technology Easy Mount Kickstand
      • Easy Mount Kickstand

        The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.

  • Icon of CUBE technology Optimal Drive Position
      • Image of CUBE technology Optimal Drive Position
      • Optimal Drive Position

        The “engine” is the critical part of an Ebike because of its weight and its junction to the regular drivetrain. These factors present a real challenge for the frame design. This is why CUBE developed an innovative new frame construction for the new Ebike generation: simultaneously being the cradle for the electric motor, the pivot for the rear link and the seat of the shock eyelet, the very complex area of the bottom bracket is made of two forged halves. The groove in the front section together with the specially formed down tube is home for the power pack which in this way has a very low position in the frame triangle. The positive outcome is an extremely low center of gravity supporting an agile riding characteristic while achieving a super rigid bottom bracket area.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology Tuned Drive Position
      • Image of CUBE technology Tuned Drive Position
      • Tuned Drive Position

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

Vásárlási információk

Hozzáadás a figyelőlistához

REACTION HYBRID HD 500 29

Ajánlott kiskereskedelmi ár

Kereskedő keresése

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

Hozzávaló kiegészítők

CUBE Stories

#becube instagram