STING WLS 120

Pro

Notre expérience nous montre que les femmes aiment parcourir les sentiers avec autant d’engagement que les hommes. C’est pourquoi nous avons développé le Sting WLS 120 Pro, un vrai vélo de trail qui a été conçu autour de l’anatomie féminine. Avec un cadre léger et 2x11 vitesses, vous serez en mesure d’apprécier parfaitement les longues sorties comme les passages rapides. Et le Size Split (cadres 16 et 18 pouces avec roues de 29", ainsi que 13.5 et 15 pouces avec roues de 27.5") permet à chacune de trouver le vélo parfait.

Trouvez unrevendeur CUBEà proximité :
Afficher toutes les spécifications

STING WLS 120 Pro

Cadre

Cadre : La nouvelle incarnation de la plateforme Sting éprouvée et toute suspendue avec 120 mm de débattement, des tubes en aluminium 7005 Superlite triple épaisseur et une maniabilité précise grâce à l’Agile Ride Geometry. Nous avons fait sauter toutes les barrières pour rendre le Sting amusant à rouler, avec un mélange de performances inspirantes et de confort incroyable. Le tube supérieur abaissé est beau, mais il améliore aussi la maniabilité du Sting WLS, apporte de la robustesse et réduit le poids. Win, win, win !


Image of 4
Bike classification category: 4
Équipement

Caractéristiques : La suspension pneumatique Manitou Minute avec 120 mm de débattement fournit des performances optimales avec un réglage facile pour s’adapter au poids et au style de la pilote, tout en restant très légère. Le niveau de qualité élevé reste de mise avec la transmission Shimano XT, le dérailleur XT précis, le pédalier compact (26/36) et une cassette 11-42 dents imbattables en matière de polyvalence et de changements de vitesses fiables et durables. Des freins à disque Shimano XT assortis fournissent de superbes performances de freinage, tandis que le confort et la maniabilité dynamique sont assurés par la selle WLS ergonomique et le cockpit spécifiquement adapté aux femmes avec Riser Bar et poignées confortables.

  • cadre HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, AXH
  • couleur black´n´orange
  • taille 27.5: 13,5", 16" // 29er: 17", 19"
  • fourche Manitou Minute TS Air, HexLock SL 15mm Axle, Tapered, 120mm
  • amortisseur Manitou Radium Expert RL, 184x44mm, Rebound Adjust, Lockout
  • entretoises d’amortisseur Top: 30x8mm, Bottom: 22x8mm
  • jeu de direction FSA 1.5E ZS, Tapered, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm)
  • potence CUBE Performance Stem Pro, 31.8mm
  • cintre CUBE Rise Trail Bar Pro, 720mm
  • poignées CUBE Natural Fit Race
  • dérailleur arričre Shimano XT RD-M8000-DSGS, ShadowPlus, 11-Speed, Direct Mount
  • dérailleur avant Shimano XT FD-M8020-D, Direct Mount, Side Swing
  • manettes Shimano SLX SL-M7000-I, Direct Attach
  • frein Shimano XT BR-M8000, Hydr. Disc Brake (180/180)
  • pédalier Shimano XT FC-M8000, 34/24T, 175mm
  • cassette Shimano SLX CS-M7000, 11-42T
  • chaîne KMC X11
  • roues Answer Atac MA, 15QR / X12, Tubeless-Ready
  • pneus Schwalbe Nobby Nic Kevlar, PerfL., 2,35
  • selle CUBE WLS Active 1.1
  • tige de selle CUBE Performance Post, 31.6mm
  • collier de selle CUBE Varioclose, 34.9mm
  • poids 13.1 kg
Géométries

Geometries

Geometry STING WLS 120 Pro Tube de selle Tube supérieur Angle tube de selle Angle de chasse Base Tube de direction Empattement Hauteur du boîtier<b>de pédalier Débattement arrière Reach Stack Wheelsize
  • Info
  • 13,5"
  • 16"
  • 17"
  • 19"
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Tarif

Si vous souhaitez un devis précis pour un vélo avec l’équipement voulu, rendez-vous idéalement dans un magasin CUBE : vous y profiterez d’un conseil complet.

Dealer map

Recherche de revendeur

 

Leisure

Tour

Endurance

Trail

 

Autres modèles de cette série

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology Woman Like Series
      • Image of CUBE technology Woman Like Series
      • Woman Like Series

        Our new WLS models come with different wheel sizes for different frame heights. The 14 and 16" frames have 27.5" wheels, the 17,19 and 21" frames are built as 29ers. Depending on body height, every woman gets the perfect riding character and geometry. The models of our Woman Like Series feature a compact frame geometry with shorter top tubes and longer head tubes, giving a riding position that is more upright than on the men’s models. This riding position relieves the pelvis and offers more comfort. The top tubes of the WLS mountain bikes are lowered, making the bike more comfortable and safe to mount and dismount.

  • Icon of CUBE technology Aluminium Superlite
      • Image of CUBE technology Aluminium Superlite
      • Aluminium Superlite

        Extremely high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are double butted, giving very light tubesets with a high level of stiffness.

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

Accessoires adaptés

#becube instagram