ATTAIN GTC

L'Attain GTC constitue une référence dans l'univers des cadres de route en carbone. Le carbone s'est affirmé comme le matériau de prédilection pour les cadres des cyclistes exigeants. Il n'est pas difficile de deviner pourquoi : c'est le matériau le plus performant et le plus moderne actuellement disponible. Il en résulte que l'Attain GTC n'est pas seulement un vélo extrêmement léger et confortable, il est aussi rapide et efficace. C'est le vélo de course idéal pour les cyclistes exigeants à la recherche d'une monture pour des sorties longues et rapides. Ce n'est absolument pas un hasard si GTC signifie Gran Turismo Composite.

Trouvez unrevendeur CUBEà proximité :
Afficher toutes les spécifications
Cadre

Cadre : Nos ingénieurs sont partis d'une page blanche pour concevoir le cadre CUBE Carbon Comfort Frame, avec pour objectif de combiner confort, performance et légèreté. Les haubans et bases arrière Aero Flex Stays ont été conçus avec un profil effilé de sorte à atténuer l'impact des aspérités de la route sur le cycliste. Cela contribue à accroître le confort et à réduire la fatigue et les douleurs musculaires, et s'avère particulièrement intéressant lorsque les heures de selle s'accumulent. Le tube diagonal oversized, combiné au boîtier de pédalier PressFit et au tube de direction conique, permet de transformer efficacement les watts produits par le cycliste en force de propulsion. Naturellement, nous avons également fait passer les câbles de dérailleur et de frein à l'intérieur du cadre. C'est un cadre high tech authentique.


Image of 1
Bike classification category: 1
Équipement

Caractéristiques : Nous avons sélectionné le système roues-pneus Mavic Aksium pour assurer l'homogénéité avec l'excellente qualité du cadre. Le groupe complet Shimano 105 est en lui-même un petit chef-d'śuvre techologique, combinant la fonctionnalité et l'efficacité des changements de vitesse des composants Ultegra ou Dura Ace à une excellente durabilité et fiabilité. Il dispose d'une transmission de 2x11 vitesses, avec un grand plateau de 50 dents et un plus petit rapport disponible de 34x32 à même de venir à bout des plus fortes pentes. Le cintre Wing Race Bar de CUBE procure une position confortable, ergonomique et aérodynamique sur le vélo, idéale pour imposer des relais longs et rapides en tête de votre groupe.

  • cadre GTC Monocoque Twin Mold Technology, Road Comfort Geometry
  • couleur carbon´n´red
  • taille 50, 53, 56, 58, 60, 62
  • fourche CUBE CSL Race, One Piece 3D-Forged Steerer/Crown, Carbon Blades, 1 1/8" - 1 1/4" Tapered
  • jeu de direction FSA I-t, Top Integrated 1 1/8", Bottom Integrated 1 1/4"
  • potence CUBE Performance Stem Pro, 31.8mm
  • cintre CUBE Wing Race Bar Compact
  • guidoline CUBE Grip Control
  • dérailleur arričre Shimano 105 RD-5800GS, 11-Speed
  • dérailleur avant Shimano 105 FD-5800, 31.8mm Clamp
  • manettes freins-vitesses Shimano 105 ST-5800
  • frein Shimano 105 BR-5800
  • pédalier Shimano 105 FC-5800, 50x34T
  • cassette Shimano 105 CS-5800, 11-32T
  • chaîne Shimano CN-HG600-11
  • roues Mavic Aksium Elite, QR/QR
  • pneus Conti Grand Sport Race SL, 25-622
  • selle CUBE RP 1.0
  • tige de selle CUBE Performance Post, 27.2mm
  • collier de selle CUBE Screwlock, 31.8 mm
  • poids 8.45 kg
Géométries

Geometries

Geometry ATTAIN GTC Tube de selle Tube de selle centre-centre Tube supérieur Angle tube de selle Angle de chasse Base Tube de direction Empattement Hauteur du boîtier<b>de pédalier Reach Stack
  • Info
  • 50cm
  • 53cm
  • 56cm
  • 58cm
  • 60cm
  • 62cm
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Tarif

Si vous souhaitez un devis précis pour un vélo avec l’équipement voulu, rendez-vous idéalement dans un magasin CUBE : vous y profiterez d’un conseil complet.

Dealer map

Recherche de revendeur

 

Comfort

Endurance

Race

Triathlon

 

Autres modèles de cette série

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Gran Turismo Composite
      • Image of CUBE technology Gran Turismo Composite
      • Gran Turismo Composite

        In designing the GTC carbon fiber frames, safety and comfort are the main factors. We use high modulus fibers for the parts which are stressed the most – the head tube, the seat tube top and the bottom bracket area. That is why the frame still offers flex and comfort resulting from the flexible tubes. Our special production process with inner and outer molding forms ensure that the minimum of required material is used, reducing overall weight even with complex frame designs. All GTC frames have of course passed DIN -Plus testing.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Twin Mold Technology
      • Image of CUBE technology Twin Mold Technology
      • Twin Mold Technology

        The Twin Mold technique uses re-usable cores during the lay-up process to ensure precision frame moulding. Special inserts guarantee optimum ply orientation during the production process to add extra strength at frame points subject to higher loads. This improves the safety of the product and delivers outstanding stiffness characteristics.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Accessoires adaptés

cube stories

Challenge accepted

Lire la suite

#becube instagram