2017

STING WLS HYBRID 120

SL 500 27.5

Le Sting WLS Hybrid 120 est l’alliance entre un vélo de trail parfaitement abouti et un puissant VTTÆ. Nous avons conçu ce vélo comme un outil ultra-fiable qui combine cadre de haute qualité avec plein de fonctions innovantes et des composants robustes et fiables. Tout est prévu pour assurer que le Sting WLS Hybrid 120 soit prêt pour tous les itinéraires que vous lui imposerez, peu importe la région où vous partez en quête d’aventures sur les sentiers.

Afficher toutes les spécifications

STING WLS HYBRID 120 SL 500 27.5

Cadre

Cadre : Le Sting Hybrid introduit le design dynamique et efficace des Stereo Hybrid dans la gamme WLS. La Tuned Drive Position (TDP) nous a permis de raccourcir les bases. Ajoutez notre concept de suspension Efficient Trail Control (ETC), la batterie semi-intégrée et l’Agile Trail Geometry (ATG) pour obtenir un châssis incroyablement compact au comportement fantastique. Et comme vous allez maintenant prendre les épingles plus vite que jamais, nous avons opté pour des moyeux Boost larges (148 mm) afin d’améliorer la rigidité de la roue et la fiabilité. Les câbles de transmission passent en interne : cachés, rangés et protégés tout en épurant les lignes du cadre.


Image of 4
Bike classification category: 4
Équipement

Caractéristiques : Le CX est le meilleur des moteurs Bosch actuellement disponible et, avec un couple jusqu’à 75Nm, c’est sans aucun doute le point fort du Sting WLS Hybrid SL. Pour assurer que toute cette puissance supplémentaire assiste pendant longtemps vos aventures sur les sentiers, nous avons inclus de série la batterie 500Wh ; pour rouler plus longtemps et plus loin. La nouvelle transmission Shimano XT 11 vitesses avec sa large cassette 11-46 vous garantit les meilleures performances de changements de vitesse ; elle vous permet aussi de toujours avoir la vitesse parfaitement adaptée à chaque situation. Le système de freins à disque hydrauliques Deore vous freinera avec sécurité par tous temps, et la fourche RockShox Recon Silver RL ainsi que l’amortisseur Fox Float DPS Performance travaillent pour ajouter du confort et de la motricité sur les sentiers les plus exigeants. Les roues rigides et robustes CUBE EX23, avec moyeux Boost 148 mm et pneus de trail Schwalbe Nobby Nic viennent peaufiner ce VTTÆ adapté aux femmes et orientées performance.

  • cadre HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ATG, Boost148mm, Tuned Drive Position, AXH
  • couleur mint´n´flashgreen
  • taille 16", 18"
  • fourche Rock Shox Recon Silver TK Air, 120mm, PopLoc
  • amortisseur Fox Float DPS Performance, 184x44mm, Open/Medium/Firm Mode, EVOL Air Sleeve
  • entretoises d’amortisseur Top: 30x8mm, Bottom: 30x8mm
  • jeu de direction FSA Orbit Z-t, Top Zero-Stack 1 1/8" (OD44mm), Bottom Integrated 1 1/2"
  • potence CUBE Performance Stem Pro, 31.8mm
  • cintre CUBE Rise Trail Bar Pro, 740mm
  • poignées CUBE Natural Fit Tour
  • dérailleur arričre Shimano XT RD-M8000-DGS, ShadowPlus, 11-Speed, Direct Mount
  • manettes Shimano XT SL-M8000-B-I, Direct Attach
  • frein Shimano Deore BR-M615, Hydr. Disc Brake (180/180)
  • pédalier FSA CK-745, 16T
  • cassette Shimano XT CS-M8000, 11-46T
  • chaîne KMC X11
  • jantes CUBE EX23, 32H, Disc, Tubeless Ready
  • moyeu avant Shimano Deore HB-M618, QR15
  • moyeu arričre Shimano Deore FH-M618-B, X12, Boost
  • pneus Schwalbe Nobby Nic Kevlar 2.35
  • selle Selle Italia WLS Performance
  • tige de selle CUBE Performance Post, 31.6mm
  • collier de selle CUBE Screwlock, 34.9mm
  • moteur Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
  • batterie Bosch PowerPack 500
  • Bosch 4A
  • display Bosch Purion
  • poids 21.8 kg
Géométries

Geometries

Geometry STING WLS HYBRID 120 SL 500 27.5 Tube de selle Tube supérieur Angle tube de selle Angle de chasse Base Tube de direction Empattement Hauteur du boîtier de pédalier Débattement arrière Reach Stack
  • Info
  • 16"
  • 18"

 

Comfort

Tour

Trail

All Mountain

Enduro

 

Autres modèles de cette série

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology Efficient Trail Control
      • Image of CUBE technology Efficient Trail Control
      • Efficient Trail Control

        Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.

  • Icon of CUBE technology FOX Customized Setup
      • Image of CUBE technology FOX Customized Setup
      • FOX Customized Setup

        Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology Tuned Drive Position
      • Image of CUBE technology Tuned Drive Position
      • Tuned Drive Position

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Boost148
      • Image of CUBE technology Boost148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Smooth Welded
      • Image of CUBE technology Smooth Welded
      • Smooth Welded

        This elaborate procedure with doubled weld seams has two advantages: On the one hand, it improves the firmness of the
        weld seams and minimizes the load peaks on the tube welds through energy flow and on the other hand, it helps the frame
        to a better and more organic look due to the smooth and hardly noticeable welds.

#becube instagram