Pro 500 27.5

Modèles de batteries

Notre Stereo Hybrid HPA 27.5 s’est rapidement imposé comme l’un des VTTÆ les plus performants de sa génération auprès des magazines et des sites Internet spécialisés. Son lancement a été une vraie révolution dans le monde du VTTÆ, car plus que tout autre modèle, le Stereo Hybrid HPA 27.5 a un comportement de pilotage en tout point similaire à celui d’un VTT sans assistance électrique. Que ce soit en montée ou en descente, le Stereo Hybrid HPA 140 Pro vous coupera le souffle (façon de parler bien sûr !).

Afficher toutes les spécifications

STEREO HYBRID 140 HPA Pro 500 27.5


Cadre : Pour 2017, nous avons optimisé le cadre de notre Stereo Hybrid HPA 140 Pro. L’utilisation du Tuned Drive Position nous a permis de modifier le positionnement du moteur Bosch et de raccourcir les bases arrière de 20 mm. Nous y avons également adapté notre Agile Ride Geometry pour atteindre un comportement de pilotage encore plus dynamique et plus équilibré. Plus performant, notre Stereo Hybrid HPA 140 Pro vous permettra d’aller plus vite. C’est pourquoi nous l’avons équipé de moyeux Boost pour une précision pilotage encore inégalée. Bien pensé, la géométrie du Stereo Hybrid HPA 140 Pro offre 140 mm débattement extrêmement bien équilibrés et efficaces même lors de pédalages intenses. Un vélo prêt à tout !

Image of 4
Catégorie de classification de vélos: 4

équipement : Le Stereo Hybrid HPA 140 Pro intègre le meilleur de la technologie Bosch : le moteur Bosch CX et ses 75Nm de couple. Plébiscité par la presse spécialisée, il est la garantie d’une expérience de pilotage optimale. La fourche Fox 34 Rhythm et l’amortisseur Float DPS Performance EVOL permettent d’avaler les sentiers les plus sauvages. La transmission Shimano XT, sa vaste cassette 11 vitesses de 11-46 dents et sa fonction ShadowPlus maintiennent la chaîne bien en place pour que vous trouviez toujours la bonne vitesse. Le système de freins à disque Magura MT4 procure un freinage progressif et puissant, même dans des conditions de météo défavorables. Nous avons conçu des roues robustes et fiables composées de moyeux Deore, de rayons DT Swiss et de jantes CUBE EX25, et les avons chaussées de pneus Schwalbe Hans Dampf pour une meilleure adhérence et plus de performance.

  • cadre HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ATG, Boost148mm, Tuned Drive Position, AXH
  • couleur black´n´flashred
  • taille 16", 18", 20", 22"
  • fourche Fox 34 Rhythm, 2-Position Sweep-Adjust GRIP Damper, Tapered, Boost 15QR, 140mm
  • amortisseur Fox Float DPS, 190x50mm, Open/Medium/Firm Mode, EVOL Air Sleeve
  • entretoises d’amortisseur Top: 30x8mm, Bottom: 30x8mm
  • jeu de direction FSA Orbit Z-t, Top Zero-Stack 1 1/8" (OD44mm), Bottom Integrated 1 1/2"
  • potence CUBE Performance Stem Pro, 31.8mm
  • cintre CUBE Rise Trail Bar Pro, 740mm
  • poignées CUBE Race Grip, 1-Clamp
  • dérailleur arričre Shimano XT RD-M8000-DGS, ShadowPlus, 11-Speed, Direct Mount
  • manettes Shimano XT SL-M8000, 11-Speed
  • frein Magura MT4, Hydr. Disc Brake (180/180)
  • pédalier FSA CK-745, 16T
  • cassette Shimano XT CS-M8000, 11-46T
  • chaîne KMC X11e, EcoProTeQ
  • jantes CUBE EX25, 32H, Disc, Tubeless Ready
  • moyeu avant Shimano Deore HB-M618-B, QR15 Boost
  • moyeu arričre Shimano Deore FH-M618-B, X12, Boost
  • pneus Schwalbe Hans Dampf 2.35
  • selle Selle Royal MTB
  • tige de selle CUBE Performance Post, 31.6mm
  • collier de selle CUBE Varioclose, 34.9mm
  • moteur Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
  • batterie Bosch PowerPack 500
  • Bosch 2A
  • display Bosch Purion
  • poids 22.1 kg


Geometry STEREO HYBRID 140 HPA Pro 500 27.5 Tube de selle Tube supérieur Angle de tube de selle Angle de tube de direction Base arrière Tube de direction Empattement Hauteur du boîtier de pédalier Débattement arrière Reach Stack
  • Info
  • 16"
  • 18"
  • 20"
  • 22"





All Mountain



Autres modèles de cette série

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology Efficient Trail Control
      • Image of CUBE technology Efficient Trail Control
      • Efficient Trail Control

        Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.

  • Icon of CUBE technology FOX Customized Setup
      • Image of CUBE technology FOX Customized Setup
      • FOX Customized Setup

        Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology Tuned Drive Position
      • Image of CUBE technology Tuned Drive Position
      • Tuned Drive Position

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Boost148
      • Image of CUBE technology Boost148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Smooth Welded
      • Image of CUBE technology Smooth Welded
      • Smooth Welded

        This elaborate procedure with doubled weld seams has two advantages: On the one hand, it improves the firmness of the
        weld seams and minimizes the load peaks on the tube welds through energy flow and on the other hand, it helps the frame
        to a better and more organic look due to the smooth and hardly noticeable welds.

#becube instagram