LTD

Race

Variantes de color

Más vale atarse bien los zapatos para montarse en la LTD Race. Cuenta con uno de los mejores cuadros de aluminio jamás desarrollados por nuestros ingenieros. Entre sus componentes específicos para carreras se encuentra la transmisión Shimano SLX y XT 2x11, una horquilla de suspensión neumática y unos frenos de disco hidráulicos que indican claramente que la Limited Race marca nuevas cotas en lo que se refiere a bicicletas rígidas de suspensión delantera fabricadas en aluminio. Ofrece las mismas excelentes sensaciones en los caminos que en las pistas de carreras.

Encuentre el distribuidor CUBE más próximo a usted:
  • application:
    Alpencross
  • frame material:
    Aluminium
  • size:
    27.5: 16", 18" // 29er: 17", 19", 21", 23"
  • Número de artículo:
    813000
Mostrar todas las especificaciones
Cuadro

Cuadro: Los cuadros de la serie LTD son de ultimísima generación. Nuestro lema es: "Más ligereza, más resistencia, más eficiencia". Por eso, la LTD Race cuenta con tubos biconificados de aluminio 6061, un innovador acoplamiento de freno IS en las vainas, cableado interno por el tubo diagonal, un pedalier PressFit y un tubo de dirección cónico. La inclusión de una tija de 27,2 mm de diámetro aumenta la comodidad del ciclista, mientras que geometría Agile Ride convierte a la LTD Race en una compañera de viaje equilibrada y ágil, ya sea en el formato de 27,5 o de 29 pulgadas.


Image of 3
Bike classification category: 3
Equipamiento

Características: El grupo 2x11 de Shimano cuenta con desviadores XT, palancas de cambio XT y un juego de plato y bielas compacto XT, garantizando la precisión de los cambios de velocidad incluso bajo carga. En la parte delantera, una horquilla de suspensión neumática RockShox Recon Silver con 100 mm de recorrido ofrece un confort y control máximos en este conjunto sometido a innumerables pruebas y comprobaciones. Las ruedas CUBE de fabricación propia se combinan con los duraderos bujes Shimano Deore Centerlock y las llantas CUBE EX21 preparadas para montaje sin cámaras. De detener la bicicleta se ocupan los insuperables frenos de disco hidráulicos Shimano XT. Además, todo ello está rematado con la combinación de colores y los accesorios CUBE de aluminio de alta calidad, para que su estética esté a la altura de sus prestaciones.

  • frame Aluminium Lite, AMF, ARG, Internal Cable Routing, Easy Mount Kickstand Ready, Tapered Headtube, PressFit BB
  • color blackline
  • size 27.5: 16", 18" // 29er: 17", 19", 21", 23"
  • fork Rock Shox Recon Silver TK AIR, Pop Loc, 100mm
  • headset FSA Orbit 1.5E ZS, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm)
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Rise Trail Bar, 700mm
  • grips CUBE Performance Grip
  • rear derailleur Shimano XT RD-M8000-DSGS, ShadowPlus, 11-Speed, Direct Mount
  • front derailleur Shimano XT FD-M8020-D, Direct Mount, Side Swing
  • shifters Shimano XT SL-M8000-I, Direct Attach
  • brake system Shimano XT BR-M8000, Hydr. Disc Brake (180/160)
  • crankset Shimano XT FC-M8000, 36x26T, 175mm
  • cassette Shimano SLX CS-M7000, 11-42T
  • chain Shimano CN-HG600-11
  • rims CUBE EX21, 32H, Disc, Tubeless Ready
  • front hub Shimano Deore HB-M615, Centerlock
  • rear hub Shimano Deore FH-M615, Centerlock
  • front tire Schwalbe Tough Tom Active, 2.25
  • rear tire Schwalbe Rapid Rob, Active, 2.25
  • pedals CUBE Aluminium MTB
  • saddle CUBE Active 1.1
  • seat post CUBE Performance Post, 27.2mm
  • seatclamp CUBE Varioclose, 31.8mm
  • weight 13.1 kg
Geometrías

Geometries

Geometry LTD Race Tubo del asiento Tubo del asiento centro-centro Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<b>con respecto al eje del buje Reach Stack Wheelsize
  • Info
  • 16"
  • 17"
  • 18"
  • 19"
  • 21"
  • 23"
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Precio

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Dealer map

Búsqueda de distribuidores

 

Leisure

Tour

Endurance

Race

 

Otros modelos de esta serie

  • Icon of CUBE technology Advanced Mechanical Forming
      • Image of CUBE technology Advanced Mechanical Forming
      • Advanced Mechanical Forming

        With our Advanced Mechanical Forming technology we can mechanically transform different frame tubes and thus optimize them without material-wearing welding work for the respective requirements. Along the obtained organic look, the production method is primarily motivated by functional reasons. Multiple converted tubes enable us to manufacture lighter and also stiffer aluminum frames.

  • Icon of CUBE technology Agile Ride Geometry
      • Image of CUBE technology Agile Ride Geometry
      • Agile Ride Geometry

        We ran innumerable tests to develop the Agile Ride Geometry in our series of big wheel bikes. We also added the 27.5in wheel size to the very well received portfolio. Three important details lead to the very agile character. Increased fork offsets let us achieve the same trail as our 26in bikes without having to steepen the head angle, thus maintaining generous toe clearance to the front wheel. Secondly we shortened the chain stays without compromising the seat angle. We invented a patented construction to mount the front derailleur to give us more tyre clearance while keeping a conventional seat angle, leading to a perfect riding position for every rider size. Last but not least we kept the BB height the same as on our 26in bikes. These measures lead to a natural riding position. Every mountain biker will feel immediately at home on a CUBE 29er or 27.5.

  • Icon of CUBE technology Aluminium Lite
      • Image of CUBE technology Aluminium Lite
      • Aluminium Lite

        6061 aluminium alloy requires a heat treatment for the finished product. It is a stiff, very corrosion resistant, fatigue resistant,high-elongation material suitable for light tubesets with high stiffness.

  • Icon of CUBE technology Easy Mount Kickstand
      • Image of CUBE technology Easy Mount Kickstand
      • Easy Mount Kickstand

        The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Accesorios apropiados

cube stories

Good morning passion

Continuar leyendo

#becube instagram