STEREO HYBRID 120

Pro 500

Variantes de color

Hay un buen motivo para que nuestra popular domadora de rutas Stereo Hybrid 120 Pro de doble suspensión sea todo un éxito entre los ciclistas. Bueno, en realidad, hay más de uno. Es cómoda, estable, sorprendentemente ligera, elegante y una forma increíblemente eficaz de ampliar tu gama off-road: una bicicleta eléctrica de Bosch para exploradores. La batería integrada puede cargarse si se desea sin necesidad de extrærla del cuadro, y además hay suficiente espacio para un bidón de agua en el tubo diagonal, para esas largas aventuras de ascensión. Nuestra geometría Agile Ride totalmente renovada, unida a su amortiguación personalizable, te proporcionan el control motivador y el confortable ajuste al terreno necesarios para cualquier ruta, ya sean largas escaladas en pista o rápidos o serpenteantes descensos entre raíces y piedras. Con una horquilla RockShox Judy Silver suave y de fácil ajuste aliada a un amortiguador RockShox Monarch y cambios de marchas suaves de 10 velocidades de Shimano acoplados a una potente unidad motriz CX de Bosch: cuentas con todo lo necesario para ir de exploración más allá de lo previsto.

Encuentre el distribuidor CUBE más próximo a usted:

Equipamiento

  • cuadro Aluminium Superlite, Gravity Casting, Triple Butted, Efficient Trail Control 4-Link, Agile Trail Geometry, Boost 148, Tuned Drive Position, AXH, Full Integrated Battery
  • talla Size Split: 27.5: 16" // 29: 17", 19", 21", 23"
  • horquilla RockShox Judy Silver TK Air, Tapered, 15x110mm, 120mm, eMTB Approved, Lockout
  • dirección FSA 1.5B ZS, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm)
  • potencia Newmen Evolution 318.4, 31.8mm
  • manillar Newmen Evolution 318.20, 760mm
  • puños CUBE Race Grip 31mm, 1-Clamp
  • rear derailleur Shimano Deore RD-M6000-DGS, ShadowPlus, 10-Speed
  • manetas Shimano Deore SL-M6000, Rapidfire-Plus
  • juego de frenos Shimano BR-MT400, Hydr. Disc Brake (180/180)
  • bielas FSA CK-745, 15T, 170mm
  • cadena KMC X10
  • color green´n´iridium
  • amortiguador RockShox Monarch RL, 184x44mm
  • piñón Shimano Deore CS-HG500, 11-42T
  • buje delantero Shimano HB-MT400-B, 15QR, Boost, Centerlock
  • buje trasero Shimano FH-MT400-B, 12mm, Boost, Centerlock
  • llantas CUBE EX30, 32H, Disc, Tubeless Ready
  • neumáticos Schwalbe Nobby Nic, PerfL, 2.60
  • Pedales CUBE PP MTB
  • sillín Natural Fit Active
  • tija CUBE Performance Post, 31.6mm
  • abrazadera de sillín CUBE Varioclose, 34.9mm
  • batería Bosch PowerTube 500
  • extras Dropper Post Option: #13621 RFR Telescope Seatpost 31.6x100mm, #13622 RFR Telescope Seatpost 31.6x125mm
  • motor Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
  • pantalla Bosch Purion
  • hardware de montaje Top: 30x8mm, Bottom: 30x8mm
  • cargador Bosch 2A
  • peso 23,9 kg

Geometries

Geometry Tubo del asiento Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<br>con respecto al eje del buje Recorrido del resorte<br>de la horquilla trasera Reach Stack Wheelsize
  • Info
  • 16''
  • 17''
  • 19''
  • 21''
  • 23''

Detalles

Esta estética tan atractiva no es meramente decorativa. Haciendo uso del concepto de batería PowerTube de Bosch, nuestro equipo de diseño ha creado un tubo diagonal de una sola pieza fabricado mediante fundición por gravedad y lo ha combinado con una cubierta de motor encargada de proteger completamente a la batería y la unidad motriz. Esta esbelta columna vertebral protege el sistema de Bosch frente a los elementos y los impactos de partículas sueltas del terreno. Además, contribuye a crear un chasis excepcionalmente rígido para un manejo preciso y una transferencia de potencia eficiente, asistido por un eje trasero de 12 x 148 mm de Boost y un tubo de dirección cónico. Y, ya que lo mencionamos, el tubo de dirección largo y el pedalier más alto mejoran respectivamente el confort en escapadas largas y la holgura respecto al suelo, e incluso hemos tenido en cuenta el peso adicional añadido por el motor y la batería incluyendo una amortiguación más progresiva. Los cables están colocados internamente para mantener la estética limpia del cuadro y que la bicicleta esté lista para mejorar todavía más con la instalación de una tija telescópica.

Image of 4
Bike classification category: 4
More about classification

Otros modelos de esta serie

 

Comfort

Trail

All Mountain

Enduro

 

Tecnología

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology Efficient Trail Control
      • Image of CUBE technology Efficient Trail Control
      • Efficient Trail Control

        Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.

  • Icon of CUBE technology Boost148
      • Image of CUBE technology Boost148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Optimal Drive Position
      • Image of CUBE technology Optimal Drive Position
      • Optimal Drive Position

        The “engine” is the critical part of an Ebike because of its weight and its junction to the regular drivetrain. These factors present a real challenge for the frame design. This is why CUBE developed an innovative new frame construction for the new Ebike generation: simultaneously being the cradle for the electric motor, the pivot for the rear link and the seat of the shock eyelet, the very complex area of the bottom bracket is made of two forged halves. The groove in the front section together with the specially formed down tube is home for the power pack which in this way has a very low position in the frame triangle. The positive outcome is an extremely low center of gravity supporting an agile riding characteristic while achieving a super rigid bottom bracket area.

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology Tuned Drive Position
      • Image of CUBE technology Tuned Drive Position
      • Tuned Drive Position

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

  • Icon of CUBE technology Smooth Welded
      • Image of CUBE technology Smooth Welded
      • Smooth Welded

        This elaborate procedure with doubled weld seams has two advantages: On the one hand, it improves the firmness of the
        weld seams and minimizes the load peaks on the tube welds through energy flow and on the other hand, it helps the frame
        to a better and more organic look due to the smooth and hardly noticeable welds.

Purchase Informations

Añadir producto a la lista de favoritos

STEREO HYBRID 120 Pro 500

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Búsqueda de distribuidores

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

Accesorios apropiados

CUBE Stories

#becube instagram