LITENING C:62

Pro

El avanzado diseño del superligero cuadro C:62, un rendimiento pulido del grupo electrónico Shimano Ultegra Di2 y una selección de componentes exclusivos, son una muestra de que la competencia lo tendrá difícil para igualar nuestras prestaciones, tanto en términos de estética como de rendimiento. Si quieres lo mejor... acabas de encontrarlo.

Encuentre el distribuidor CUBE más próximo a usted:
Mostrar todas las especificaciones
Cuadro

Cuadro: Las tecnologías de carbono C:62 desarrolladas en el marco innovador de nuestra tecnología Monocoque Advanced Twin Mold nos han permitido obtener el máximo rendimiento de este cuadro. Es más ligero, rígido y cómodo que nuestros cuadros de carbono anteriores. Todo en uno. El cableado interno crea una estética limpia. Además, hemos incluido la horquilla CSL C:62 de CUBE, cuyas patas ærodinámicas y muy finas combinan la precisión máxima en la conducción con la mejor absorción posible de vibraciones. La geometría Litening está diseñada para ser todavía más agresiva, transmitiendo una viva sensación que combina agilidad y estabilidad.


Image of 1
Bike classification category: 1
Equipamiento

Características: Nada logra un cambio de marchas más rápido que los grupos electrónicos de Shimano, y en este caso hemos escogido un Ultegra Di2. Sus cambios impecables evidencian que la bicicleta se convierte directamente en una extensión del ciclista. El superligero juego de ruedas Fulcrum Racing 55, con neumáticos One Kevlar de Schwalbe, saca el máximo partido de la eficiencia de la transmisión con una increíble aceleración y un agarre soberbio. La comodidad y ergonomía optimizada combina con nuestra elección de la tija CUBE Performance Motion Post, con gran capacidad para absorber vibraciones, y con el manillar CUBE de carbono y la potencia Syntace F149, en un conjunto perfecto para recorrer fácil y rápidamente kilómetros y kilómetros de carretera.

  • frame CUBE C:62 Advanced Twin Mold Technology, Internal Cable Routing
  • color blackline
  • size 50, 52, 54, 56, 58, 60, 62
  • fork CUBE CSL Evo C:62 Technology, 1 1/8 - 1 1/4" Tapered
  • headset FSA Orbit C33 ACB I-t Integrated, Top 1 1/8", Bottom 1 1/4"
  • stem Syntace F149
  • handlebar Cube Wing Race Bar Carbon
  • handlebar tape CUBE Grip Control
  • rear derailleur Shimano Ultegra Di2 RD-6870-SS, 11-Speed
  • front derailleur Shimano Ultegra Di2 FD-6870, Braze-On
  • shift-brake-levers Shimano Ultegra Di2 ST-6870
  • brake system Shimano Ultegra BR-6800
  • crankset Shimano Ultegra FC-6800, 50x34T, 170mm (50/52cm), 172,5mm (54/56/58cm), 175mm (60/62cm)
  • cassette Shimano Ultegra CS-6800, 11-28T
  • chain Shimano CN-HG700-11
  • wheelset Fulcrum Racing 55, QR/QR
  • tires Schwalbe One, Kevlar, 25-622
  • saddle Selle Italia X1 Road
  • seat post CUBE Performance Motion Post, 27.2mm
  • seatclamp CUBE Screwlock, 31.8 mm
  • weight 7.5 kg
Geometrías

Geometries

Geometry LITENING C:62 Pro Tubo del asiento Tubo del asiento centro-centro Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<b>con respecto al eje del buje Reach Stack
  • Info
  • 50cm
  • 52cm
  • 54cm
  • 56cm
  • 58cm
  • 60cm
  • 62cm
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Precio

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Dealer map

Búsqueda de distribuidores

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

 

Comfort

Endurance

Race

Triathlon

 

Otros modelos de esta serie

  • Icon of CUBE technology Advanced Twin Mold
      • Image of CUBE technology Advanced Twin Mold
      • Advanced Twin Mold

        This technique uses a complete core to provide the perfect frame form during the lay-up process. As with the Twin Mold technology, precise inserts are used to ensure extra strength at high-stress frame points. This combination offers maximum control over fibre orientations during the lay-up and production process. The Advanced Twin Mold high-tech carbon manufacturing process translates to outstanding product safety and quality together with optimum weight and stiffness characteristics.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Accesorios apropiados

cube stories

Challenge accepted

Continuar leyendo

#becube instagram