AGREE C:62

Race Disc

Sube la rampa de salida con la Agree C:62 Race Disc y se te acabarán las excusas para no avanzar, pero a cambio, tendrás entre manos una bicicleta de competición impresionante que será tu arma secreta. Tanto en ascensos, donde su peso reducido garantiza que la bici y el ciclista prácticamente vuelan montaña arriba, como en descensos, donde los fabulosos frenos de disco hidráulicos aseguran una frenada rápida y segura hasta en las bajadas más serpenteantes, serás un ganador. Este cuadro de carbono de última tecnología, equipado con el inigualable grupo completo Shimano Ultegra, simplemente marca el camino.

Encuentre el distribuidor CUBE más próximo a usted:
Mostrar todas las especificaciones

AGREE C:62 Race Disc

Cuadro

Cuadro: La decisión de equipar esta bicicleta con frenos de disco implicaba realizar algunos cambios en el diseño del cuadro. Con una nueva horquilla y un sistema de eje pasante X12 en la parte delantera y trasera, conseguimos incorporar una gran rigidez al chasis, que se traduce en un rendimiento estable y suave, incluso a gran velocidad y en frenadas bruscas. La caja de pedalier PressFit es el tipo de detalle vanguardista que esperas encontrarte en nuestras bicis y, por supuesto, hemos incluido el cableado interno. No es solo una cuestión de estética, sino que además aumenta el rendimiento de los cables y su vida útil.


Image of 1
Bike classification category: 1
Equipamiento

Características: El usuario de la Agree C:62 Race Disc espera mucho de su bicicleta, por eso equipamos esta máquina nacida para la competición con una tija ligera Performance Motion de CUBE y manillar de carbono. Y, en las ruedas, optamos por un par de ruedas DT-Swiss R32 Spline Disc con neumáticos Schwalbe One Kevlar de 25 mm que garantizan un agarre fabuloso. El grupo completo Shimano Ultegra (con juego de bielas de 50/34 y piñón de 11-28) responderá a tus expectativas. Y, como no, los frenos de disco hidráulicos Shimano son otro de los elementos destacados de su equipamiento, configurados con discos RT99 de 140 mm delantero y trasero con tecnología Freezer.

  • frame C:62 Advanced Twin Mold Technology Aero Frame, Flat Mount Disc, Road Aero Endurance Geometry, AXH, X12
  • color carbon´n´flashred
  • size 50, 53, 56, 58, 60, 62
  • fork CUBE CSL Evo Aero C:62 Technology, 1 1/8" / 1 1/4" Tapered, Flat Mount, X12
  • headset FSA I-t, Top Integrated 1 1/8", Bottom Integrated 1 1/4"
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Wing Race Bar Carbon
  • handlebar tape CUBE Grip Control
  • rear derailleur Shimano Ultegra RD-6800SS, 11-Speed
  • front derailleur Shimano Ultegra FD-6800F, Braze-On
  • shift-brake-levers Shimano ST-RS685
  • brake system Shimano BR-RS805, Hydr. Disc Brake, Flat Mount (140/140)
  • crankset Shimano Ultegra FC-6800, 50x34T, 170mm (50/53cm), 172,5mm (56/58cm), 175mm (60/62cm)
  • cassette Shimano Ultegra CS-6800, 11-28T
  • chain Shimano CN-HG700-11
  • wheelset DT Swiss Spline R32 Disc, 12x100mm / 12x142mm, Centerlock
  • tires Schwalbe One, Kevlar, 25-622
  • saddle Selle Italia X1 Road
  • seat post CUBE Performance Motion Post, 27.2mm
  • seatclamp CUBE Aero, Semi-Integrated
  • weight 8.1 kg
Geometrías

Geometries

Geometry AGREE C:62 Race Disc Tubo del asiento Tubo del asiento centro-centro Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<b>con respecto al eje del buje Reach Stack
  • Info
  • 50cm
  • 53cm
  • 56cm
  • 58cm
  • 60cm
  • 62cm
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Precio

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Dealer map

Búsqueda de distribuidores

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

 

Comfort

Endurance

Race

Triathlon

 

Otros modelos de esta serie

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Advanced Twin Mold
      • Image of CUBE technology Advanced Twin Mold
      • Advanced Twin Mold

        This technique uses a complete core to provide the perfect frame form during the lay-up process. As with the Twin Mold technology, precise inserts are used to ensure extra strength at high-stress frame points. This combination offers maximum control over fibre orientations during the lay-up and production process. The Advanced Twin Mold high-tech carbon manufacturing process translates to outstanding product safety and quality together with optimum weight and stiffness characteristics.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

Accesorios apropiados

cube stories