AERIUM HPA

Pro

Si eres un deportista multidisciplinar, ya sabrás que cada salida en bicicleta es una carrera contrarreloj. Ese es el motivo por el que hemos desarrollado la Aerium HPA. Su cuadro de aluminio hidroformado de alta calidad combina la tecnología de las bicicletas profesionales para pruebas contrarreloj con la posición de conducción ærodinámica de las de triatlón, pero manteniendo su versatilidad multideportiva. El resultado es una bicicleta divertida pero ambiciosa a la hora de enfrentarse a sus competidores.

Encuentre el distribuidor CUBE más próximo a usted:
Mostrar todas las especificaciones
Cuadro

Cuadro: La principal ventaja de esta bicicleta es que goza de una ærodinámica óptima para alcanzar la máxima velocidad. El cuadro de aluminio de alto rendimiento (HPA) con triple conificado utiliza un complejo hidroformado para aumentar la rigidez y reducir el peso, con el fin de que puedas batir todos tus récords. Su geometría hace especial hincapié en la eficiencia ærodinámica mediante un pronunciado ángulo del sillín que ofrece una posición de conducción con una resistencia al aire mínima. La ærodinámica de los tubos del cuadro y de sus conexiones especialmente diseñadas, ahorra unos segundos preciosos en las carreras, mientras que gracias al ancho pedalier se obtiene una estructura de cuadro rígida para ofrecer la mejor transferencia de energía posible.


Image of 1
Bike classification category: 1
Equipamiento

Características: Hemos equipado la Aerium HPA con la transmisión Shimano Ultegra, de eficacia demostrada en competiciónes y con unas fiables bielas cpn platos de 38 y 52 dientes FSA Trimax Pro. La horquilla de carbono Dedacciai Black Fin Aero reúne una construcción ligera con una ærodinámica excelente. Las ruedas 30/Twentyfour de Profile y el manillar CUBE también aportan su granito de arena para mantener baja la resistencia al aire. Y, como era de esperar en una máquina diseñada para la competición, se han seleccionado las cubiertas de rodadura rápida y gran agarre Continental Grand Sport Race SL.

  • frame Aero Hydroform HPA 7005 Ultralight, Triple Butted
  • color black´n´grey
  • size 49, 52, 55, 59
  • fork Dedacciai Black Fin Carbon Aero
  • headset FSA Orbit Z semi-integrated 1 1/8"
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Compact Race Bar
  • bar extensions Profile T4 Plus Alloy
  • handlebar tape CUBE Grip Control
  • rear derailleur Shimano Ultegra RD-6800SS, 11-Speed
  • front derailleur Shimano Ultegra FD-6800F, Braze-On
  • shift-brake-levers Shimano 105 ST-5800
  • brake system Shimano BR-R561
  • crankset FSA Trimax Pro, 52x38T, 170mm (S), 172.5mm (M/L/XL)
  • cassette Shimano 105 CS-5800, 11-28T
  • chain Shimano CN-HG600-11
  • wheelset Profile Design 30/TwentyFour Aero Clincher
  • tires Conti Grand Sport Race SL, 25-622
  • saddle CUBE RP 1.0
  • seat post CUBE Aero Prolight
  • seatclamp CUBE Aerium Aero Clamp
  • weight 9.75 kg
Geometrías

Geometries

Geometry AERIUM HPA Pro Tubo del asiento Tubo del asiento centro-centro Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<b>con respecto al eje del buje Reach Stack
  • Info
  • 49cm
  • 52cm
  • 55cm
  • 59cm
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Precio

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Dealer map

Búsqueda de distribuidores

 

Comfort

Endurance

Race

Triathlon

 

Otros modelos de esta serie

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology Aerodynamic System
      • Image of CUBE technology Aerodynamic System
      • Aerodynamic System

        Perfect aerodynamics and geometry adjustment characterize this package to the smallest detail the light and stiff Advanced Twin Mold carbon frame with horizontal dropouts is designed for the use of electronic circuit components to minimize air resistance. Battery and cable are hiding elegantly in the framework and also the brakes fit perfectly together with the Aerium Super HPC carbon fork.

  • Icon of CUBE technology Aluminium Ultralite
      • Image of CUBE technology Aluminium Ultralite
      • Aluminium Ultralite

        Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are triple butted, giving very light tubesets with a high level of stiffness.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Accesorios apropiados

cube stories

Raelert-Brothers

Continuar leyendo