LTD

SL

Variantes de color

Como modelo superior de la serie Limited, la LTD SL tiene un cuadro de aluminio de alta calidad y unos componentes de gama superior que sin duda provocarán las miradas de envidia de sus compañeros de pedaleo. Y, como era de esperar de un enfoque centrado en las prestaciones, ofrece el mejor funcionamiento posible en todo tipo de terrenos.

Encuentre el distribuidor CUBE más próximo a usted:
  • application:
    Alpencross
  • frame material:
    Aluminium
  • size:
    27.5: 16", 18" // 29er: 17", 19", 21", 23"
  • Número de artículo:
    814000
Mostrar todas las especificaciones
Cuadro

Cuadro: Su equipamiento más bien parece una lista de deseos: tubos de aluminio 6061 biconificados y conformados mecánicamente, acoplamiento de freno IS en las vainas, cableado interno, pedalier PressFit y tubo de dirección cónico. Todo ello se ha incluido para garantizar que no se desperdicia ni un solo julio de energía, para que cada maniobra de dirección se transfiera a la carretera y para que todo se consiga con un peso increíblemente bajo. Incluso hemos tenido en cuenta la comodidad y hemos incorporado una tija de 27,2 mm. La LTD SL puede rodar sobre cualquier terreno y, gracias a la geometría Agile Ride, conserva su agilidad y dinamismo tanto si opta por la opción de 27,5 como por la de 29 pulgadas.


Image of 3
Bike classification category: 3
Equipamiento

Características: żEs una bicicleta todoterreno de altas prestaciones o una bicicleta de carreras? La respuesta es fácil: las dos cosas. La extraordinaria horquilla de suspensión Fox 32 Float Performance con 100 mm de recorrido es el complemento perfecto para el manejo preciso del cuadro, y ofrece tanto una absorción suave y progresiva de los baches en los terrenos accidentados como una maniobrabilidad de exactitud minuciosa. Para satisfacer las necesidades de los ciclistas más exigentes, hemos incluido en las especificaciones los impecables cambios del grupo de transmisión y frenos XT de Shimano con plato y bielas de 26/36. El cambio trasero XT ShadowPlus con fijación Direct Mount ofrece unos cambios casi instantáneos, mientras que el sistema I-Spec de Shimano mantiene ordenado el puesto de conducción. Los radios de alta calidad DT Swiss unen las llantas Alex MD21, preparadas para montaje sin cámaras, con los fiables bujes Shimano Deore para formar el conjunto de ruedas ideal.

  • frame Aluminium Lite, AMF, ARG, Internal Cable Routing, Easy Mount Kickstand Ready, Tapered Headtube, PressFit BB
  • color blackline
  • size 27.5: 16", 18" // 29er: 17", 19", 21", 23"
  • fork Fox 32 Float Perfromance, 100mm
  • headset FSA Orbit 1.5B ZS-1, Semi-Integrated, Top 1 1/8" Bottom 1 1/2"
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Rise Trail Bar, 700mm
  • grips CUBE Performance Grip
  • rear derailleur Shimano XT RD-M8000-DSGS, ShadowPlus, 11-Speed, Direct Mount
  • front derailleur Shimano XT FD-M8020-D, Direct Mount, Side Swing
  • shifters Shimano XT SL-M8000-I, Direct Attach
  • brake system Shimano XT BR-M8000, Hydr. Disc Brake (180/160)
  • crankset Shimano XT FC-M8000, 36x26T, 175mm
  • cassette Shimano SLX CS-M7000, 11-42T
  • chain Shimano CN-HG600-11
  • rims CUBE EX21, 32H, Disc, Tubeless ready
  • front hub Shimano Deore HB-M615, Centerlock
  • rear hub Shimano Deore FH-M615, Centerlock
  • front tire Schwalbe Tough Tom Active, 2.25
  • rear tire Schwalbe Rapid Rob, Active, 2.25
  • pedals CUBE Aluminium MTB
  • saddle CUBE Active 1.1
  • seat post CUBE Performance Post, 27.2mm
  • seatclamp CUBE Varioclose, 31.8mm
  • weight 12.5 kg
Geometrías

Geometries

Geometry LTD SL Tubo del asiento Tubo del asiento centro-centro Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<b>con respecto al eje del buje Reach Stack Wheelsize
  • Info
  • 16"
  • 17"
  • 18"
  • 19"
  • 21"
  • 23"
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Precio

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Dealer map

Búsqueda de distribuidores

Highlight features

Fox 32 Float Performance Horquilla

Fox 32 Float Performance, 100 mm: La horquilla Fox 32 Float ofrece una amortiguación perfecta y adaptable al ciclista.

Shimano XT br-M8000 Freno

Fiable 100 % y muy potente, así es el nuevo freno Shimano XT que, además, cuenta con un nuevo cilindro maestro más ligero y resistente que se integra perfectamente en el sistema.

Shimano XT FC-M8000 Biela

La doble biela ofrece el mayor impulso que haya ofrecido jamás Shimano para una MTB y con sus dos platos delanteros garantiza un ritmo óptimo.

Shimano SLX CS-M7000 Casete

El nuevo casete SLX de Shimano armoniza las prestaciones con una amplia gama de aplicaciones.

Internal Cable Routing
Internal Cable Routing
Tapered Head Tube
Tapered Head Tube

 

Leisure

Tour

Endurance

Race

 

Otros modelos de esta serie

Advanced Mechanical Forming

Con nuestra tecnología de conformado mecánico avanzado podemos cambiar de forma mecánica los tipos más diversos de tubos de cuadros y optimizar así los respectivos requisitos sin provocar la fatiga del material. Además de lograr un aspecto armonioso, este método de producción se debe principalmente a razones funcionales. A menudo los tubos se someten a diversos cambios de forma, lo cual nos permite fabricar cuadros de aluminio más ligeros y más rígidos.

Agile Ride Geometry

La dificultad a la hora de desarrollar bicicletas de 29 y 27,5 pulgadas es que las diferentes longitudes de las vainas, centros de gravedad y distancia entre ejes tienen un efecto negativo sobre el manejo en comparación con las bicicletas de montaña de 26 pulgadas. Nosotros hemos compensado esto con tres soluciones principales: hemos mantenido la misma altura de pedalier en las gamas 29" y 27,5" de CUBE que en nuestras bicicletas de 26". Hemos inventado una estructura para montar el desviador (pendiente de patente) con objeto de mantener todas las prestaciones de los cambios y lograr una mayor distancia respecto a los neumáticos de modo que las vainas se mantengan lo más cortas posible. Otra ventaja de esta estructura es que no es necesario doblar o mover el tubo del sillín, de modo que la inclinación de dicho tubo es la misma para todos los ciclistas. Por último, pero no menos importante, los desplazamientos especiales de las horquillas nos permiten lograr la misma trayectoria que la de nuestras bicicletas de 26" sin necesidad de elevar el ángulo frontal. Esto garantiza que las bicicletas de 29 y 27,5 pulgadas de CUBE ofrezcan el mismo manejo que las bicicletas de montaña anteriormente existentes.

  • Icon of CUBE technology Advanced Mechanical Forming
      • Image of CUBE technology Advanced Mechanical Forming
      • Advanced Mechanical Forming

        With our Advanced Mechanical Forming technology we can mechanically transform different frame tubes and thus optimize them without material-wearing welding work for the respective requirements. Along the obtained organic look, the production method is primarily motivated by functional reasons. Multiple converted tubes enable us to manufacture lighter and also stiffer aluminum frames.

  • Icon of CUBE technology Agile Ride Geometry
      • Image of CUBE technology Agile Ride Geometry
      • Agile Ride Geometry

        We ran innumerable tests to develop the Agile Ride Geometry in our series of big wheel bikes. We also added the 27.5in wheel size to the very well received portfolio. Three important details lead to the very agile character. Increased fork offsets let us achieve the same trail as our 26in bikes without having to steepen the head angle, thus maintaining generous toe clearance to the front wheel. Secondly we shortened the chain stays without compromising the seat angle. We invented a patented construction to mount the front derailleur to give us more tyre clearance while keeping a conventional seat angle, leading to a perfect riding position for every rider size. Last but not least we kept the BB height the same as on our 26in bikes. These measures lead to a natural riding position. Every mountain biker will feel immediately at home on a CUBE 29er or 27.5.

  • Icon of CUBE technology Aluminium Lite
      • Image of CUBE technology Aluminium Lite
      • Aluminium Lite

        6061 aluminium alloy requires a heat treatment for the finished product. It is a stiff, very corrosion resistant, fatigue resistant,high-elongation material suitable for light tubesets with high stiffness.

  • Icon of CUBE technology Easy Mount Kickstand
      • Image of CUBE technology Easy Mount Kickstand
      • Easy Mount Kickstand

        The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Accesorios apropiados

cube stories

Good morning passion

Continuar leyendo