AIM

Pro

Variantes de color

Aspirantes a conquistadores de caminos: su búsqueda de la bicicleta perfecta ha llegado a su fin, ya que el magnífico diseño de la Aim Pro y su atrevida combinación de colores son la definición misma de la pasión sobre dos ruedas. Como su propio nombre indica, la Aim Pro apunta muy alto. Detalles tales como su cuadro de aluminio de alta calidad y sus frenos de disco hidráulicos contribuyen a que esta bicicleta destaque entre las de la competencia. La Aim Pro promete una experiencia de conducción extraordinaria, tanto si eliges la versión con ruedas de 27,5 pulgadas como de 29 pulgadas.

Encuentre el distribuidor CUBE más próximo a usted:
  • frame material:
    Aluminium
  • size:
    27.5: 14", 16", 18" // 29er: 17", 19", 21", 23"
  • Número de artículo:
    801001
Mostrar todas las especificaciones
Cuadro

Cuadro: La complejidad está en los detalles. Para empezar, los tubos horizontal y diagonal de aluminio 6061 son extremadamente ligeros y rígidos gracias a nuestro proceso de conformado mecánico. Entre otros rasgos sobresalientes se incluyen el cableado interno y una prolija integración del disco IS entre los tirantes y las vainas. Los orificios de la puntera facilitan su transformación en una bicicleta perfecta para el uso diario. La geometría Agile Ride está inspirada en nuestra experiencia en bicicletas de carreras, proporcionando un manejo ágil y dinámico a la vez que fácil de controlar: es igualmente perfecta para divertirse pedaleando en senderos irregulares que en trayectos largos.


Image of 3
Bike classification category: 3
Equipamiento

Características: La Aim Pro incluye toda clase de componentes de primera categoría, lo que la convierte en una introducción ideal a las bicicletas de montaña CUBE equipadas con frenos de disco. Los frenos de disco hidráulicos Tektro HDM 285 proporcionan una parada segura y potente incluso en condiciones adversas. La sensible horquilla de suspensión Suntour XCT con 100 mm de recorrido ofrece un confort y control máximos hasta en las rutas más agrestes. Por otro lado, la transmisión Shimano 3x8 ofrece unos cambios de velocidad suaves y fiables, y las cubiertas Schwalbe Smart Sam combinan su baja resistencia a la rodadura con un agarre todoterreno excelente. Todo contribuye a una experiencia de conducción relajada, que le permite lograr el máximo rendimiento con un esfuerzo mínimo.

  • frame Aluminium Lite, AMF, Internal Cable Routing, Easy Mount Kickstand Ready
  • color flashorange´n´grey
  • size 27.5: 14", 16", 18" // 29er: 17", 19", 21", 23"
  • fork SR Suntour XCT Disc, 100mm
  • headset CUBE No.10 Semi-Integrated
  • stem CUBE Performance Stem, 31.8mm
  • handlebar CUBE Rise Trail Bar, 660mm
  • grips CUBE Performance Grips
  • rear derailleur Shimano RD-TX800, 8-Speed
  • front derailleur Shimano FD-TY700-TS6, Downswing
  • shifters Shimano SL-M310, Rapidfire-Plus
  • brake system Tektro HD-M285, Hydr. Disc Brake (160/160)
  • crankset Shimano Tourney FC-TY301, 42x32x22T, 170mm
  • cassette Shimano CS-HG200, 12-32T
  • chain KMC Z7
  • rims CUBE SX, 32H, Disc
  • front hub CUBE Disc Hub, 6-Bolt
  • rear hub CUBE Disc Hub, 6-Bolt
  • tires Schwalbe Smart Sam Active, 2.1"
  • pedals CUBE PP MTB
  • saddle CUBE Active 1.1
  • seat post CUBE Performance Post, 27.2mm
  • seatclamp CUBE Varioclose, 31.8mm
  • weight 13.95 kg
Geometrías

Geometries

Geometry AIM Pro Tubo del asiento Tubo del asiento centro-centro Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<b>con respecto al eje del buje Reach Stack Wheelsize
  • Info
  • 14"
  • 16"
  • 17"
  • 18"
  • 19"
  • 20"
  • 21"
  • 23"
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Precio

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Dealer map

Búsqueda de distribuidores

 

Leisure

Tour

Endurance

Race

 

Otros modelos de esta serie

  • Icon of CUBE technology Advanced Mechanical Forming
      • Image of CUBE technology Advanced Mechanical Forming
      • Advanced Mechanical Forming

        With our Advanced Mechanical Forming technology we can mechanically transform different frame tubes and thus optimize them without material-wearing welding work for the respective requirements. Along the obtained organic look, the production method is primarily motivated by functional reasons. Multiple converted tubes enable us to manufacture lighter and also stiffer aluminum frames.

  • Icon of CUBE technology Agile Ride Geometry
      • Image of CUBE technology Agile Ride Geometry
      • Agile Ride Geometry

        We ran innumerable tests to develop the Agile Ride Geometry in our series of big wheel bikes. We also added the 27.5in wheel size to the very well received portfolio. Three important details lead to the very agile character. Increased fork offsets let us achieve the same trail as our 26in bikes without having to steepen the head angle, thus maintaining generous toe clearance to the front wheel. Secondly we shortened the chain stays without compromising the seat angle. We invented a patented construction to mount the front derailleur to give us more tyre clearance while keeping a conventional seat angle, leading to a perfect riding position for every rider size. Last but not least we kept the BB height the same as on our 26in bikes. These measures lead to a natural riding position. Every mountain biker will feel immediately at home on a CUBE 29er or 27.5.

  • Icon of CUBE technology Aluminium Lite
      • Image of CUBE technology Aluminium Lite
      • Aluminium Lite

        6061 aluminium alloy requires a heat treatment for the finished product. It is a stiff, very corrosion resistant, fatigue resistant,high-elongation material suitable for light tubesets with high stiffness.

  • Icon of CUBE technology Easy Mount Kickstand
      • Image of CUBE technology Easy Mount Kickstand
      • Easy Mount Kickstand

        The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.

  • Icon of CUBE technology Frame Safe System
      • Image of CUBE technology Frame Safe System
      • Frame Safe System

        To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Accesorios apropiados

cube stories

Good morning passion

Continuar leyendo

#becube instagram