STEREO 120 HPC

Race

Con el depurado diseño de su armazón, que ofrece una inteligente combinación de cuadro principal de carbono y vainas de aluminio de alta resistencia, la Stereo 120 HPC Race es increíblemente rápida en senderos estrechos y en carreras de resistencia, y una máquina polivalente e igualmente potente cuando la ruta se complica. La combinación de una conducción excelente con el grupo XT 2x11 de Shimano se traduce en infinidad de kilómetros recorridos en senderos y caminos con los mejores resultados. Es la compañera ideal para apasionados del ciclismo de toda índole, y está disponible con ruedas de 27,5 o 29 pulgadas gracias al sistema Size Split.

Encuentre el distribuidor CUBE más próximo a usted:
  • application:
    Tour/Trail
  • frame material:
    Aluminium Carbon
  • size:
    27.5: 16", 18", 20" // 29er: 19", 21", 23"
  • Número de artículo:
    854300
Mostrar todas las especificaciones

STEREO 120 HPC Race

Cuadro

Cuadro: La Stereo HPC combina un cuadro principal de carbono monocasco ultraligero, fabricado con nuestra tecnología avanzada Twin Mold, con vainas de aluminio 6061 T6 y bieletas forjadas Trail Motion Rocker. También forman parte del conjunto el tubo de dirección cónico, el cableado interno, el pedalier PressFit y el eje pasante X12. El diseño Efficient Trail Control (ETC) y la geometría Agile Trail (ATG) de CUBE se reúnen para dotar a la Stereo 120 HPC Race de unas prestaciones de suspensión de calidad constante en todos los tamaños de cuadro y ruedas y, por supuesto, las mismas características de carrera excelentes que cabe esperar de todos nuestros modelos Stereo. No hay ninguna bicicleta con doble suspensión de 120 mm mejor ni más versátil.


Image of 4
Bike classification category: 4
Equipamiento

Características: Un cuadro como este se merece, evidentemente, los mejores componentes. El grupo 2x11 de Shimano ofrece cambios de velocidad siempre impecables, con platos adaptados al tamaño de la rueda y una parada potente y uniforme gracias a los frenos hidráulicos con discos de 180 mm de enfriamiento rápido. Las ruedas Fulcrum Red44, ligeras y rígidas, son las compañeras perfectas tanto para carreras como para pedalear por senderos accidentados, y para 2017 ofrecen unas llantas más anchas para adaptarse mejor a las diferentes cubiertas disponibles en la actualidad. La horquilla de suspensión Fox 32, excepcionalmente ligera, y el amortiguador trasero Float DPS con sistema de doble pistón son capaces de domesticar todos los obstáculos, mientras que las cubiertas Schwalbe Nobby Nic de 2,25 pulgadas ofrecen un agarre insuperable. Además, la tija telescópica CUBE añade todavía más versatilidad, ofreciendo nuevas posibilidades de trayectos a los ciclistas más aventureros.

  • frame HPC Carbon Monocoque Advanced Twin Mold Technology, Aluminum 6061 T6 Rear Triangle, ATG, ETC 4-Link, AXH
  • color carbon´n´white
  • size 27.5: 16", 18", 20" // 29er: 19", 21", 23"
  • fork Fox 32 Float, 3-Position Micro-Adjust GRIP damper, 15QR, Tapered, 120mm
  • shock Fox Float DPS, 184x44mm, Open/Medium/Firm Mode, LV Air Canister
  • shock hardware Top: 30x8mm, Bottom: 22x8mm
  • headset FSA Orbit I-t, Integrated, Top 1 1/8", Bottom 1 1/2"
  • stem CUBE Performance Stem Pro, 31.8mm
  • handlebar CUBE Rise Trail Bar Pro, 720mm
  • grips CUBE Race Grip, 1-Clamp
  • rear derailleur Shimano XT RD-M8000-DSGS, ShadowPlus, 11-Speed, Direct Mount
  • front derailleur Shimano XT FD-M8020-D, Direct Mount, Side Swing
  • shifters Shimano XT SL-M8000-I, Direct Attach
  • brake system Shimano XT BR-M8000, Hydr. Disc Brake (180/180)
  • crankset Shimano XT FC-M8000, 27.5": 36x26T // 29": 34x24T, 175mm (180mm for 23" frame size)
  • cassette Shimano XT CS-M8000, 11-42T
  • chain Shimano CN-HG601-11
  • wheelset Fulcrum Red 44, 28/28 Spokes, 15mm / X12
  • tires Schwalbe Nobby Nic Kevlar 2.25, LiteSkin
  • saddle Selle Italia SC1
  • seat post CUBE Dropper Post, Handlebar Lever, Internal Cable Routing, 31.6mm, 458x150mm (400x120mm for smallest frame size)
  • seatclamp CUBE Screwlock, 34.9mm
  • weight 12.8 kg
Geometrías

Geometries

Geometry STEREO 120 HPC Race Tubo del asiento Tubo superior horizontal Ángulo del asiento Ángulo del tubo de dirección Vainas de la cadena Tubo de dirección Batalla Altura del eje pedalier<b>con respecto al eje del buje Recorrido del resorte<b>de la horquilla trasera Reach Stack Wheelsize
  • Info
  • 16"
  • 18"
  • 19"
  • 20"
  • 21"
  • 23"
FAQ

Please find frequently asked questions about our CUBE Bikes here.

Who can I contact if I have a problem with my CUBE bike?

CUBE Dealer

Your first port of call should always be the CUBE shop where you bought the bike. Only the CUBE dealer with which you have the original sale contract is commited to processing complaints and warranty queries. Other CUBE dealers can process complaints handlings on a voluntary basis, but are not obliged to.

How long do I have guarantee / warranty on my CUBE bike?

WARRANTY TERMS AND CONDITIONS

Your CUBE bike is warranted to be free from manufacturing defects for 2 years with effect from the date of sale. In addition, we provide our customers with the following warranty in the event of frame breakage outside the statutory warranty period as follows:

For all frames and rigid forks from model years 2011 and older we guarantee from the date of sale from the dealer:

Aluminium 5 Years Guarantee
Titanium 5 Years Guarantee
Carbon, Alu-Carbon 2 Years Guarantee

For all frames and rigid forks from model year 2012 we guarantee from the date of sale from the dealer:

Aluminium 6 Years Guarantee
Carbon, Alu-Carbon 3 Years Guarantee

If a break occurs during this period (from date of sale), we will replace the frame with the same or similar. This warranty applies only to the frame. The cost of components necessary for the frame's function (e.g. seat post, derailleur, handlebar and stem, suspension fork …), even where a replacement frame necessitates replacement of some or all of these components, must be borne by the customer.

EXCLUSIONS:

For Fritzz, Hanzz, Two15, for all dirt bikes, and all frame exchanges add on parts are not included into this extended warranty. Here the 2 years limited warranty applies.

We reserve the right to repair defective frames or parts or to replace them with the corresponding updated model. A condition of the warranty is normal use of the bike in accordance with the manufacturer’s stipulations.

Modification work outside the statutory warranty period (2 years) is not carried out or refunded by us free of charge.

We therefore request that the customer be fully aware of this stipulation on conclusion of the sales contract in order to avoid possible misunderstandings at a later date.

EPO warranty

For all EPO 2011/2012 series Pedelecs with goSwiss rear wheel hub drive we grant a 2 year warranty for display, engine and battery. Warranty for the battery is limited to 1000 charge cycles with a remaining capacity of up to 80%. For Pedelec models built after 2013 we grant a 2 year warranty beginning with the date of sale. We ask you to inform the customer about exclusions and limitations in order to avoid any future misunderstandings. For our Hybrid Pedelec model frames the general CUBE warranty and guarantee conditions apply. For the Bosch motor and its associated components Bosch's own warranty conditions apply. Details about the Bosch system, the Bosch warranty and any limitations and conditions can be found in the Bosch manual which is enclosed with the bike. Any warranty claim relating to the Bosch motor must be processed via the Bosch service scheme.

BOSCH warranty:

The warranty period lasts 24 months from the date of sale of the eBike to the end consumer, but no later than 6 months after delivery of the Bosch components to the bike manufacturer. If the end consumer's eBike is intended for commercial use ( e.g. rental company, messenger service), the warranty period lasts 12 months.

Battery Pack warranty

A minimum of 500 charging cycles or 70% (300Wh) and 60% (400Wh) respectively of the nominal capacity (based on information stored on the Battery Pack) within the warranty period.

Damage resulting from improper use. This includes, but is not limited to, the use of a Pedelec bike in a bike park or similar, overstrain through jumping or any alteration of the original Bosch system.

Special case: carbon frame and carbon forks

We offer you and your customer a CCR Service (CUBE Crash Replacement Service) = exchange service for damaged carbon frames and carbon forks. This exchange service is intended to provide an uncomplicated and cost-saving exchange service for your customer following a crash which results in damage to the frame/carbon forks.

Excluded from the guarantee and warranty are all forms of damage due to improper use or use not in accordance with manufacturer stipulations (e.g. use of a standard frame as a dirt bike, fitting double crown forks, extension of suspension travel, overstressing due to jumps etc.) and all defects due to normal wear and tear. The extended warranty does not apply to the Fritzz, Hanzz, Two15 model, all dirt bikes and carbon frames and all fitted components necessitated by a frame swap.

Is it possible to transfer guarantee to a second buyer?

The guarantee becomes null and void when the original buyer sells the bike.

What are parts subject to wear and tear and how long are they covered by guarantee?

The following is a non-exhaustive list of parts subject to wear and tear:

  • Rims (where rim brakes are fitted)
  • Tyres
  • Chains
  • Chainrings
  • Sprockets
  • Hub bearings
  • Sealed bearings
  • Headsets
  • Bearing sets on full-suspension frames
  • Wires and cables
  • Disc brake rotors
  • Brake pads
  • Handlebar grips
  • Saddles
  • Bushings, seals and bearings used in suspension components (fork, rear shock) and dropper seat posts
  • (Non-)rechargeable batteries used in electronic systems

Parts subject to wear and tear must be serviced and maintained regularly in order to ensure they work smoothly. Components subject to high loads and stresses, such as chains and bearing sets, must be replaced regularly.

Please note that parts subject to wear and tear are not covered by the standard guarantee and/or warranty.

Precio

Para el precio exacto con el equipamiento deseado visita una de las CUBE Stores: aquí obtendrás un asesoramiento completo.

Dealer map

Búsqueda de distribuidores

 

Cross Country

Tour/Trail

All Mountain

Enduro

Gravity

 

Otros modelos de esta serie

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Advanced Twin Mold
      • Image of CUBE technology Advanced Twin Mold
      • Advanced Twin Mold

        This technique uses a complete core to provide the perfect frame form during the lay-up process. As with the Twin Mold technology, precise inserts are used to ensure extra strength at high-stress frame points. This combination offers maximum control over fibre orientations during the lay-up and production process. The Advanced Twin Mold high-tech carbon manufacturing process translates to outstanding product safety and quality together with optimum weight and stiffness characteristics.

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology Efficient Trail Control
      • Image of CUBE technology Efficient Trail Control
      • Efficient Trail Control

        Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.

  • Icon of CUBE technology FOX Customized Setup
      • Image of CUBE technology FOX Customized Setup
      • FOX Customized Setup

        Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

Accesorios apropiados

cube stories

Say yes to the no

Continuar leyendo

#becube instagram