stereo 150 HPA

Race 27.5+

We don't follow the crowd at CUBE. Only when we're convinced that a new trend has proved its worth, do we develop our own take on it. The Stereo 150 HPA Race 27.5+ is a perfect example. Building on the foundation of wide, grippy 27.5+ wheels, we kitted this new frame concept out with a complete set of CUBE components to make an unbeatable all-mountain / enduro bike. Limits? What limits?

  • frame HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ISCG Mount, Boost148, AXH
  • color grey´n´flashred
  • Art. No 759300

Show all Specifications

Frame

We know how to build a light but stiff aluminium chassis. The Stereo 150's 27.5+ compatible chassis is no exception. With the special, extra wide tyres and Agile Trail Geometry (ATG), you're guaranteed an incredible combination of agility and safe handling. Efficient Trail Control (ETC) suspension design makes a chassis that practically defies the laws of physics - efficient uphill, but blisteringly quick and stable downhill too. Internally routed gear cables, the compact Trail Motion Rocker linkage and a deep section top tube all contribute to the modern, clean looks.

Components

The Stereo 150 HPA Race 27.5+ likes everything a little bit larger. That's why the Rock Shox suspension components are equipped with enduro class technologies - a YARI RC fork with 150mm travel and 110x15mm Boost axle up front, and the potent Monarch RT3 air shock at the rear. Nobby Nic tyres - all 3.0inch width of them - and CSW B+ 3.7 wheels with 40mm rims work together to give this bike its exceptional trail manners. In terms of traction and all-round fun, nothing else comes close. Sram's GX group provides the transmission, supplemented by a Race Face Turbine Cinch chainset with direct mount chainring. The Sram R hydraulic brake set brings everything safely to a halt, thanks to its 4 piston calipers.

Geometry

  • CUBE geometry info
  • Info
  • 16"
  • 18"
  • 20"
  • 22"
  • frame HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ISCG Mount, Boost148, AXH
  • color grey´n´flashred
  • size 16", 18", 20", 22"
  • fork Rock Shox Yari RC Solo Air 27.5+, Boost 110x15QR Maxle, Tapered, 150mm
  • shock Rock Shox Monarch RT DebonAir, 200x57mm
  • shock hardware Top: 30x8mm, Bottom: 22x8mm
  • headset FSA 1.5E ZS, Tapered, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm)
  • stem Race Face Ride 35
  • handlebar Race Face Ride 35 Riser, 760mm
  • grips CUBE Fritzz Grip, 2-Clamp
  • rear derailleur Sram GX1, 11-Speed
  • shifters Sram GX Trigger
  • brake system Sram Guide R, Hydr. Disc Brake (180/180)
  • crankset Race Face Turbine 30T Boost, 175mm, PressFit
  • cassette Sram XG-1150, 10-42
  • chain KMC X11
  • wheelset DT CSW B+ 3.7 Straightpull Wheelset, 28/28 Spokes, Boost 110x15mm / Boost148 X12, 40mm Tubeless Ready Rim, DT Swiss Pro Head® Reinforcement System, Squorx® Alloy Nipples
  • front tire Schwalbe Nobby Nic Kevlar 3.00, TrailStar, Tubeless Easy
  • rear tire Schwalbe Nobby Nic Kevlar 3.00, PaceStar, Tubeless Easy
  • saddle SDG Circuit MTN
  • seat post CUBE 120mm Adjustable Seatpost, Handlebar Lever, Internal Cable Routing, 31.6x420mm
  • seatclamp CUBE Screwlock, 34.9mm
  • weight 13.55 kg

More models of this series

  • Icon of CUBE technology ADAPTABLE X12 HANGERIcon of CUBE technology ADAPTABLE X12 HANGER
      • ADAPTABLE X12 HANGER
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology ADVANCED HYDROFORMINGIcon of CUBE technology ADVANCED HYDROFORMING
      • ADVANCED HYDROFORMING
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology AGILE TRAIL GEOMETRYIcon of CUBE technology AGILE TRAIL GEOMETRY
      • AGILE TRAIL GEOMETRY
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology ALUMINIUM ULTRALITEIcon of CUBE technology ALUMINIUM ULTRALITE
      • ALUMINIUM ULTRALITE
      • Aluminium Ultralite

        Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are triple butted, giving very light tubesets with a high level of stiffness.

  • Icon of CUBE technology BOOST148Icon of CUBE technology BOOST148
      • BOOST148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology EFFICIENT TRAIL CONTROLIcon of CUBE technology EFFICIENT TRAIL CONTROL
      • EFFICIENT TRAIL CONTROL
      • Efficient Trail Control

        Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.

  • Icon of CUBE technology FSP4LINKIcon of CUBE technology FSP4LINK
      • FSP4LINK
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology HIGH PERFORMANCE ALUMINIUMIcon of CUBE technology HIGH PERFORMANCE ALUMINIUM
      • HIGH PERFORMANCE ALUMINIUM
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology INTEGRATED CABLE ROUTINGIcon of CUBE technology INTEGRATED CABLE ROUTING
      • INTEGRATED CABLE ROUTING
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology INTEGRATED POST MOUNTIcon of CUBE technology INTEGRATED POST MOUNT
      • INTEGRATED POST MOUNT
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren’t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology PRESS FIT BBIcon of CUBE technology PRESS FIT BB
      • PRESS FIT BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology STEALTH READYIcon of CUBE technology STEALTH READY
      • STEALTH READY
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame – if not required – will be sealed with a cover for protection.

  • Icon of CUBE technology TAPERED HEAD TUBEIcon of CUBE technology TAPERED HEAD TUBE
      • TAPERED HEAD TUBE
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology TRAIL MOTION ROCKERIcon of CUBE technology TRAIL MOTION ROCKER
      • TRAIL MOTION ROCKER
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology WET PAINT SURFACEIcon of CUBE technology WET PAINT SURFACE
      • WET PAINT SURFACE
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology X12 THROUGH AXLEIcon of CUBE technology X12 THROUGH AXLE
      • X12 THROUGH AXLE
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.