Turn up to a race or a training ride with the Agree C:62 Race Disc and it's fair to say that you've run out of excuses... but you've also got a thoroughbred racing machine on your side. With a full Newmen cockpit setup, Shimano's extraordinary Ultegra gears and hydraulic disc brakes and a light, stiff and strong Newmen Evolution SL R.32 wheelset, this is an endurance machine that will bring out the best in every rider. Whether it's tough climbs - where its low weight and exceptional drivetrain efficiency come to the fore - or long, fast descents - where the fade-free power of the hydraulic disc brakes and agile geometry work together to ensure you're always in full control - you're onto a winner. And all served up with the comfort you need to reduce fatigue, mile after mile. This cutting edge carbon frame is equipped to perform. All that's missing is you.
Find your nearest CUBE dealer
Seat Tube Seat Tube Center-Center Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height to Hub Reach Stack Wheelsize 
You know the saying: power is nothing without control. When we set out to design the chassis for the Agree C:62 Race Disc, we knew we had to achieve both exceptional drivetrain efficiency and unsurpassed comfort. Mutually incompatible goals? Not for CUBE's engineers. A tapered head tube, oversized down tube and PressFit bottom bracket shell work with 12mm axles to delivery razor-sharp handling and incredible drivetrain efficiency, with strength to spare to handle the extra loads from hydraulic disc brakes. Meanwhile, slender stays and carbon fork blades are specially designed to help reduce rider fatigue on even the roughest road surfaces. Internally routed cables, Di2 compatability and an integrated seat clamp add the finishing touches that emphasise this bike's thoroughbred potential.
We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.
Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.
With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.
This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.
This technique uses a complete core to provide the perfect frame form during the lay-up process. As with the Twin Mold technology, precise inserts are used to ensure extra strength at high-stress frame points. This combination offers maximum control over fibre orientations during the lay-up and production process. The Advanced Twin Mold high-tech carbon manufacturing process translates to outstanding product safety and quality together with optimum weight and stiffness characteristics.
On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.
Perfect aerodynamics and geometry adjustment characterize this package to the smallest detail the light and stiff Advanced Twin Mold carbon frame with horizontal dropouts is designed for the use of electronic circuit components to minimize air resistance. Battery and cable are hiding elegantly in the framework and also the brakes fit perfectly together with the Aerium Super HPC carbon fork.
For a definitive statement on the price of the bike with the desired equipment, drop in at one of the CUBE dealers: there you will receive comprehensive advice.
