Our Cross Hybrid SL Allroad is the pinnacle of our versatile Cross range. That's why our designers wanted a bike that cut no corners in its pursuit of the ultimate blend of comfort, safety and performance. So you'll find top drawer components like the RockShox air fork and wide-ranging 11 speed Shimano XT gears, which work seamlessly with the powerful Bosch drive unit and 500Wh battery to deliver a ride that's smooth and practically effortless. Throw in the full mudguards, lighting system and integrated kickstand and it all adds up to one thing: a no-compromise, incredibly versatile hybrid that'll fit into your busy life just perfectly. Where will you ride tomorrow?
Seat Tube Seat Tube Center-Center Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height<br> to Hub Reach Stack 
There's a good reason we poured all our experience developing mountain bike hybrid frames into the Cross Hybrid SL Allroad: it's the best way to ensure it has the strength, stiffness and stability to make the best of Bosch's astonishing drive system. Features like the hydroformed down tube, double butted aluminium superlite tubes and tapered head tube all contribute to a structure that's incredibly rigid and surprisingly light. By using a gravity cast motor mount, our engineering team integrated the drive and battery units almost seamlessly into the frame design, positioning both in the ideal spot for efficiency and the safe, responsive handling that you'd expect from CUBE. You can even charge the battery without removing it, and fitting a luggage carrier is an easy upgrade thanks to our 3D forged dropouts.
Extremely high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are double butted, giving very light tubesets with a high level of stiffness.
With our specially designed Efficient Comfort Geometry, long distances can be covered easily. Trips with the family, tours with friends or a journey of months - explore the world and life in a new way with our travel series geometry.
To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.
This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.
On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.
The “engine” is the critical part of an Ebike because of its weight and its junction to the regular drivetrain. These factors present a real challenge for the frame design. This is why CUBE developed an innovative new frame construction for the new Ebike generation: simultaneously being the cradle for the electric motor, the pivot for the rear link and the seat of the shock eyelet, the very complex area of the bottom bracket is made of two forged halves. The groove in the front section together with the specially formed down tube is home for the power pack which in this way has a very low position in the frame triangle. The positive outcome is an extremely low center of gravity supporting an agile riding characteristic while achieving a super rigid bottom bracket area.
The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.
Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
This elaborate procedure with doubled weld seams has two advantages: On the one hand, it improves the firmness of the
weld seams and minimizes the load peaks on the tube welds through energy flow and on the other hand, it helps the frame
to a better and more organic look due to the smooth and hardly noticeable welds.
CUBE Bikes with this labelling fulfill all legal requirements and meet all safety demands according to the StVZO German Road Traffic Licensing Regulations. Lighting systems and reflectors mounted are tested and certified accordingly. These bikes take into account every security-related detail to guarantee safe and relaxed mobility in traffic.
