STEREO 150

27.5+

Here at CUBE we're not known for following the crowd - we forge our own path. That's why we waited to establish the benefits of the 27.5+ format, before taking everything we'd learnt and building it into the Stereo 150 27.5+. Built on the foundation of the extra traction and control offered by 27.5+ wheels, we developed a suspension platform that would reap these benefits and sow the seeds of a blisteringly fast, capable all-mountain / enduro bike. SRAM's iconic 1x12 Eagle transmission combined with RockShox fork and shock will help you redefine your riding boundaries. Limits? What limits?

Find your nearest CUBE dealer

Components

  • frame HPA Ultralight, Advanced Hydroform, Triple Butted, ETC 4-Link, ISCG Mount, Boost148, AXH
  • size 16", 18", 20", 22"
  • fork Rock Shox Yari RC Solo Air 27.5+, 110x15mm Maxle stealth, Tapered, 150mm
  • headset FSA 1.5E ZS, Tapered, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm)
  • stem Race Face Aeffect R 35
  • handlebars Race Face Ride 35, 760mm
  • grips SDG Slater
  • rear derailleur Sram GX Eagle, 12-Speed
  • shifters Sram GX Eagle Trigger
  • brake system Sram Guide R, Hydr. Disc Brake (180/180)
  • crankset Sram X1 Eagle 30T, 175mm
  • chain Sram GX Eagle
  • colour black´n´blue
  • shock Rock Shox Monarch RT DebonAir, 200x57mm
  • cassette Sram XG-1275, 10-50T
  • wheelset Answer Plus Atac, 15x110mm / 12x148mm, 584x40C, Tubeless Ready
  • tyres Reifen Nobby Nic,ASpeedgrip,TLE,Kevlar,schwarz/Standard Label,Apex,27.5 x 2.80 2018
  • saddle SDG FLY MTN 2
  • seat post CUBE Dropper Post, Handlebar Lever, Internal Cable Routing, 31.6mm, 440x150mm (400x125mm for smallest frame size)
  • seatclamp CUBE Screwlock 34.9mm
  • shock hardware Top: 30x8mm, Bottom: 22x8mm
  • weight 14,6 kg

Geometries

Geometry Seat Tube Top Tube Horizontal Seat Tube Angle Head Tube Angle Chain Stays Head Tube Wheelsbase BB-Height<br> to Hub Rear Travel Reach Stack
  • Info
  • 16"
  • 18"
  • 20"
  • 22"

Details

We know how to build a light but stiff aluminium chassis - and the Stereo 150 27.5+ compatible frame is no exception. With the grip offered by the extra wide tyres and the control afforded by our Agile Trail Geometry (ATG), you're guaranteed an incredible combination of lively but safe handling. Efficient Trail Control (ETC) suspension design makes a riding platform that practically defies the laws of physics - efficient uphill, but blisteringly quick, stable and assured downhill too. We didn't forget the small details, either. Internally routed cables, the compact Trail Motion Rocker linkage and a deep section top tube all contribute to the Stereo 150 27.5+'s modern, clean looks.

Image of 4
Bike classification category: 4
More about classification

More models of this series

 

Cross Country

Tour/Trail

All Mountain

Enduro

Gravity

 

Technology

  • Icon of CUBE technology Adaptable X12 Hanger
      • Image of CUBE technology Adaptable X12 Hanger
      • Adaptable X12 Hanger

        We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

  • Icon of CUBE technology Advanced Hydroforming
      • Image of CUBE technology Advanced Hydroforming
      • Advanced Hydroforming

        The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. All

  • Icon of CUBE technology Agile Trail Geometry
      • Image of CUBE technology Agile Trail Geometry
      • Agile Trail Geometry

        The Agile Trail Geometry carries over the Agile Ride Geometry?s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.

  • Icon of CUBE technology Aluminium Ultralite
      • Image of CUBE technology Aluminium Ultralite
      • Aluminium Ultralite

        Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are triple butted, giving very light tubesets with a high level of stiffness.

  • Icon of CUBE technology Boost148
      • Image of CUBE technology Boost148
      • Boost148

        Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke?s wider support in comparison to the 142mm hubs used previously.

  • Icon of CUBE technology Efficient Trail Control
      • Image of CUBE technology Efficient Trail Control
      • Efficient Trail Control

        Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.

  • Icon of CUBE technology FSP4Link
      • Image of CUBE technology FSP4Link
      • FSP4Link

        The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this ? CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

  • Icon of CUBE technology High Performance Aluminium
      • Image of CUBE technology High Performance Aluminium
      • High Performance Aluminium

        For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

  • Icon of CUBE technology Integrated Cable Routing
      • Image of CUBE technology Integrated Cable Routing
      • Integrated Cable Routing

        Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.

  • Icon of CUBE technology Integrated Post Mount
      • Image of CUBE technology Integrated Post Mount
      • Integrated Post Mount

        The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adpater aren?t needed anymore, and fewer parts means less weight. In this case we save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.

  • Icon of CUBE technology Press Fit BB
      • Image of CUBE technology Press Fit BB
      • Press Fit BB

        With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

  • Icon of CUBE technology Stealth Ready
      • Image of CUBE technology Stealth Ready
      • Stealth Ready

        Dropper seat posts are getting more and more widespread, but to integrate them optimally in the frame, they have to be factory fitted. With the Stealth Ready frames, it is possible to build in a dropper seat post with internally routed cables, which besides the clean look, helps prevent any cables getting jammed. The exit of the cable on the frame ? if not required ? will be sealed with a cover for protection.

  • Icon of CUBE technology Tapered Steerer
      • Image of CUBE technology Tapered Steerer
      • Tapered Steerer

        This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

  • Icon of CUBE technology Trail Motion Rocker
      • Image of CUBE technology Trail Motion Rocker
      • Trail Motion Rocker

        The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.

  • Icon of CUBE technology Wet Paint Surface
      • Image of CUBE technology Wet Paint Surface
      • Wet Paint Surface

        On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

  • Icon of CUBE technology X12 Through Axle
      • Image of CUBE technology X12 Through Axle
      • X12 Through Axle

        In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

Purchase Informations

Add to watchlist

STEREO 150 27.5+

For a definitive statement on the price of the bike with the desired equipment, drop in at one of the CUBE dealers: there you will receive comprehensive advice.

Dealer map

Dealer search

Fahrrad Leasing

Berechnen Sie Ihre Vorteile mit JobRad.

JETZT BERECHNEN

Suitable accessories

CUBE Stories

#becube