The Advanced Twin Mold process eliminates any dangerous folding by continuous control of carbon fibres during the curing process. This is made possible by an internal form which provides the perfect frame form during the layup process. Each individual fibre remains precisely in position as it cures. In this way less material can be used as the individual layers can be more accurately and reliably positioned. This production method also makes it possible to increase the carbon fibre proportion in line with anticipated loadings at specific points on the frame. In 2013 all SUPER HPC models will be manufactured using this high-tech method.

With press-fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

This new steerer tube design is stiffer than a conventional straight steerer and generates a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means that the greatest possible steering precision is generated. With the larger steerer the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

The “no fuss” function of electronic shifting convinces more and more riders. Even long-time friends of classic gear shifting won’t want to do without the comfort and performance of electronic shifting once they have used it. We have equipped our upper range AGREE GTC and LITENING SUPER HPC models with the possibilty to house both kinds of gear shifting. You can easily switch to the new electronic system because you need only different cable stoppers at the downtube and another flap for the bottom bracket where you can fix the Shimano Short Battery mount nicely.

At the LITENING SUPER HPC and upper level models of the AGREE GTC we mount the Multi Purpose Hanger. This makes fitting the internal cable routing easier because there is a bigger opening at the chainstay. On the other hand for both shifting systems, the electronic and the classic system, the perfect cable routing can be offered. Furthermore it comes with the proven frame save system protecting the dropout of the frame.

On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.