Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and non-shearing. Our Superlite tubes are triple butted, giving very light tube-sets with a high level of stiffness.

The new models STEREO, FRITZZ and HANZZ are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve this custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while simultaneously increasing the reliability.

Size Tuned Kinematics is a four-pivot suspension technology developed exclusively by CUBE. It guarantees that every frame in every size will have exactly the same dynamic properties in terms of wheel travel, axle path and spring rate curve.

A very well received development which is used in all AMS models including the all-new  AMS 100 Super HPC  29.  With Efficient Ride Control particular attention has been given to the fact that irrespective of body size EVERY rider can have the optimum and identical riding experience. Here on a model-by-model basis we have differently designed the linkage geometry so that all frame sizes have the same travel and spring rate curves (STK ). In addition the kinematics have been optimised specifically to travel in respect of sensitivity, drive and no bobbing. For this it was necessary to specially position all rear pivot points. Whether the rider is large or small, with any of these models he will always have the optimum ride experience.

Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four pivot chainstay construction. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.

The postmount system is found at all carbon fiber frames, the high end models of the touring bikes and the upper range aluminum models. The bolts and the IS adpater aren’t needed anymore, less parts mean less weight. In this case we save 30 grams. This may not sound a lot. But as you see, there is potential to save weigth in every detail.

With press-fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

The colour of our aluminium frames with eloxal f inish is achieved by anodising, a chemical surface treatment process. This treatment hardens the surface, making the aluminium 1000times more scratch-resistant than before.

On our high performance aluminium frames, graphics and text are laser-cut into the material, making them indestructible for a lifetime.

This new steerer tube design is stiffer than a conventional straight steerer and generates a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means that the greatest possible steering precision is generated. With the larger steerer the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.

Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.